Hey guys just a quick background of me, I started learning JNCIA about 6 months on/off just reading and using Juniper Olive 14.1 via VMware to get familiar with some of the commands the 2nd and 3rd chapter of the learning guide had. I've started and finished a few other courses during the time so I basically placed juniper on the back burner.
However, I'm trying to do the following configurations;
Vlan config- how to config a vlan
Inter vlan routing-Assigning ports to the vlanAssigning Ip address to ports
I just need some guidance on what needs to be done for each of them if possible. Note I will be configuring an EX switch for them.
Any assistance is greatly appreciated thanks.
Please refer to below tutorials.
How to Configure L2-VLAN on JUniper EX Switches
Configuring Layer-3 Routed VLAN Interfaces on an EX Series Switch
[KUDOS PLEASE! If you think I earned it!
If this solution worked for you please flag my post as an "Accepted Solution" so others can benefit..]
Thanks alot this seems to be what im looking for