Junos OS

Expand all | Collapse all

Reinstall juniper M7i

Jump to Best Answer
  • 1.  Reinstall juniper M7i

    Posted 04-04-2018 05:08

    I try to reinstall juniper m7i with install-media-14.1R9, 

    I use 1Gb and 2Gb CF, 80Gb harddisk, but stuck in harddisk is missing 

    "WARNING: Hard disk missing, installing only on compact-flash" 

     

     

    Award Modular BIOS v4.51PG, An Energy Star Ally
    Copyright (C) 1984-98, Award Software, Inc.

    BIOS Version 1.2
    11/02/2004-i440GX-SMC67X-2A69TU00C-00
    Will try to boot from :
    PCMCIA ATA Flash Card
    Compact Flash
    Ethernet
    Boot Sequence is reseted due to a PowerUp

    Trying to Boot from PCMCIA ATA Flash Card
    CD Loader 1.00

    Building the boot loader arguments
    8172
    3629
    4411
    Relocating the loader and the BTX
    Starting the BTX loader
    Consoles: serial port
    BIOS drive C: is disk0
    BIOS drive 😧 is disk1
    BIOS drive E: is disk2
    BIOS 639kB/1571840kB available memory

    FreeBSD/i386 bootstrap loader, Revision 1.2
    (builder@larth.juniper.net, Wed Feb 21 16:23:55 UTC 2018)
    Loading /boot/defaults/loader.conf
    /kernel text=0x5de98c data=0x42194+0xa133c syms=[0x4+0x738c0+0x4+0xa9d8a]
    /boot/modules/miibus.ko text=0x7dc0 data=0x408+0x14 syms=[0x4+0xab0+0x4+0xbf7]
    /boot/modules/if_bge.ko text=0xfeec data=0x370+0x80 syms=[0x4+0xe40+0x4+0xe12]
    /boot/modules/if_em.ko text=0x147fc data=0x7e4+0x14 syms=[0x4+0x18d0+0x4+0x1c89]
    /boot/modules/if_bce.ko text=0xd398 data=0x16db8+0x24e4 syms=[0x4+0x1540+0x4+0x17e7]
    /boot/modules/if_bxe.ko text=0xf869c data=0x7dd8+0x28 syms=[0x4+0x2130+0x4+0x2738]
    /boot/modules/mesw.ko text=0x63cc data=0x344+0x78 syms=[0x4+0xbf0+0x4+0xede]
    /boot/modules/sfccb.ko text=0x1168 data=0x1c8+0x20 syms=[0x4+0x5e0+0x4+0x55b]
    /boot/modules/sngcb.ko text=0xfe0 data=0x1d0+0x20 syms=[0x4+0x5b0+0x4+0x510]
    /boot/modules/ptxfabsw.ko text=0x1190 data=0x164+0x10 syms=[0x4+0x430+0x4+0x416]
    /boot/modules/mac_runasnonroot.ko text=0x8d8 data=0x4d8 syms=[0x4+0x330+0x4+0x3bf]
    loading required module 'kernel_mac_support'
    /boot/modules/mac_pcap.ko text=0x640 data=0x4f0+0x4 syms=[0x4+0x300+0x4+0x34e]
    loading required module 'kernel_mac_support'
    /boot/modules/virtio.ko text=0x2160 data=0x210 syms=[0x4+0x7d0+0x4+0x95e]
    /boot/modules/virtio_pci.ko text=0x2de8 data=0x200+0x8 syms=[0x4+0x8f0+0x4+0xb22]
    /boot/modules/virtio_blk.ko text=0x2998 data=0x1e0+0xc syms=[0x4+0x960+0x4+0xa0f]
    /boot/modules/if_vtnet.ko text=0x6104 data=0x35c+0x10 syms=[0x4+0xe10+0x4+0xf2f]

    Hit [Enter] to boot immediately, or space bar for command prompt.
    Booting [/kernel]...
    platform_early_bootinit: M/T/EX Series Early Boot Initialization
    GDB: debug ports: sio
    GDB: current port: sio
    KDB: debugger backends: ddb gdb
    KDB: current backend: ddb
    Copyright (c) 1996-2018, Juniper Networks, Inc.
    All rights reserved.
    Copyright (c) 1992-2007 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
    FreeBSD is a registered trademark of The FreeBSD Foundation.
    JUNOS 14.1R9.1 #0: 2018-02-21 18:27:15 UTC
    builder@larth.juniper.net:/volume/build/junos/14.1/release/14.1R9.1/obj-i386/junos/bsd/kernels/MFS/kernel
    link_elf: symbol ipv6_linklocal_hint undefined
    KLD file if_em.ko - could not finalize loading
    module_register: module pci/sfccb already exists!
    Module pci/sfccb failed to register: 17
    module_register: module pci/sngcb already exists!
    Module pci/sngcb failed to register: 17
    module_register: module pci/hdkcb_fabsw already exists!
    Module pci/hdkcb_fabsw failed to register: 17
    Timecounter "i8254" frequency 1193182 Hz quality 0
    CPU: Intel Pentium III (845.64-MHz 686-class CPU)
    Origin = "GenuineIntel" Id = 0x68a Stepping = 10
    Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
    real memory = 1610612736 (1536 MB)
    avail memory = 1558171648 (1485 MB)
    Initializing M/T/EX platform properties ..
    cpu0 on motherboard
    DRAM Data Integrity Mode: ECC Mode with h/w scrubbing
    pcib0: <Intel 82443GX host to PCI bridge (AGP disabled)> pcibus 0 on motherboard
    pir0: <PCI Interrupt Routing Table: 14 Entries> on motherboard
    pci0: <PCI bus> on pcib0
    isab0: <PCI-ISA bridge> at device 7.0 on pci0
    isa0: <ISA bus> on isab0
    atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 7.1 on pci0
    ata0: <ATA channel 0> on atapci0
    ata1: <ATA channel 1> on atapci0
    pci0: <serial bus, USB> at device 7.2 (no driver attached)
    smb0: <Intel 82371AB SMB controller> port 0x5000-0x500f at device 7.3 on pci0
    cbb0: <TI1520 PCI-CardBus Bridge> mem 0xe6045000-0xe6045fff irq 15 at device 13.0 on pci0
    cardbus0: <CardBus bus> on cbb0
    pccard0: <16-bit PCCard bus> on cbb0
    cbb1: <TI1520 PCI-CardBus Bridge> mem 0xe6040000-0xe6040fff irq 9 at device 13.1 on pci0
    cardbus1: <CardBus bus> on cbb1
    pccard1: <16-bit PCCard bus> on cbb1
    fxp0: <Intel 82559ER Embedded 10/100 Ethernet> port 0xdc00-0xdc3f mem 0xe6044000-0xe6044fff,0xe6020000-0xe603ffff irq 9 at device 16.0 on pci0
    fxp1: <Intel 82559ER Embedded 10/100 Ethernet> port 0xe000-0xe03f mem 0xe6047000-0xe6047fff,0xe6000000-0xe601ffff irq 10 at device 19.0 on pci0
    orm0: <ISA Option ROM> at iomem 0xc8000-0xd17ff on isa0
    sc0: <System console> at flags 0x100 on isa0
    sc0: MDA <16 virtual consoles, flags=0x100>
    vga0: <Generic ISA VGA> at port 0x3b0-0x3bb iomem 0xb0000-0xb7fff on isa0
    atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
    atkbd0: <AT Keyboard> irq 1 on atkbdc0
    sio0 at port 0x3f8-0x3ff irq 4 flags 0x90 on isa0
    sio0: type 16550A, console
    sio1 at port 0x2f8-0x2ff irq 3 on isa0
    sio1: type 16550A
    sio2 at port 0x3e8-0x3ef irq 5 on isa0
    sio2: type 16550A
    sio3: configured irq 9 not in bitmap of probed irqs 0x80
    sio3: port may not be enabled
    sio3 at port 0x2e8-0x2ef irq 9 on isa0
    sio3: type 16550A
    Initializing product: 14 ..
    Overriding block private ifstate to PFE
    platform_mastership_init: Unknown product_type 0x0000000e
    fxp0: Ethernet address 00:a0:a5:5c:1e:9f
    Timecounter "TSC" frequency 845640427 Hz quality 800
    ###PCB Group initialized for udppcbgroup
    ###PCB Group initialized for tcppcbgroup
    mata2: <SanDisk SDP> at port 0x100-0x10f irq 15 function 0 config 1 on pccard0
    dad0: 2000MB <UNIGEN FLASH FW100511> at ata0-master PIO4
    ad1: not attached, missing in Boot List
    device_attach: ad1 attach returned 12
    unknown: timeout waiting to issue command
    unknown: error issuing ATA_IDENTIFY command
    unknown: timeout waiting to issue command
    unknown: error issuing ATA_IDENTIFY command
    ad3: 977MB <SanDisk SDCFJ-1024 HDX 4.04> at ata2-master PIO4
    Kernel thread "wkupdaemon" (pid 40) exited prematurely.
    0: Preloaded image </mdimg> 8468480 bytes at 0xc0c17558
    Trying to mount root from cd9660:/dev/md0
    Disabling watchdog
    =================== Bootstrap installer starting ===================
    Initialized the environment
    Routing engine model is RE-850
    HW model is Intel Pentium III
    Discovered that flash disk = ad0 , hard disk = ad1
    ** /dev/ad0s1a
    ** Last Mounted on /mnt
    ** Phase 1 - Check Blocks and Sizes
    ** Phase 2 - Check Pathnames
    ** Phase 3 - Check Connectivity
    ** Phase 4 - Check Reference Counts
    ** Phase 5 - Check Cyl groups
    515 files, 15493 used, 891319 free (63 frags, 111407 blocks, 0.0% fragmentation)
    ** /dev/ad0s1e
    ** Last Mounted on /mnt/config
    ** Phase 1 - Check Blocks and Sizes
    ** Phase 2 - Check Pathnames
    ** Phase 3 - Check Connectivity
    ** Phase 4 - Check Reference Counts
    ** Phase 5 - Check Cyl groups
    2 files, 2 used, 100703 free (23 frags, 12585 blocks, 0.0% fragmentation)
    fsck: cannot open `/dev/ad1s1a': No such file or directory
    fsck: cannot open `/dev/ad1s1e': No such file or directory
    fsck: cannot open `/dev/ad1s1f': No such file or directory
    WARNING: Hard disk missing, installing only on compact-flash
    Disk to install is ad0
    mfs: available=2976272
    hw.physmem: 1610612736
    hw.usermem: 1579700224
    hw.realmem: 1610612736
    Reserving 270336 for mfs /var
    Using 2705936 for /tmp
    WARNING: The installation will erase the contents of your disks.
    Do you wish to continue (y/n)?

     

    If I choose Y and continue the compact flash is not large enough to complete.

     How do I get the hard disk to be detected?



  • 2.  RE: Reinstall juniper M7i
    Best Answer

    Posted 04-18-2018 00:29

    solved

    type in kernel : 

    sysctl -w machdep.bootdevs=pcmcia-flash,compact-flash,disk,lan 

     

    then reboot and install untill finish. 

     

    thanks all. 



  • 3.  RE: Reinstall juniper M7i

    Posted 04-18-2018 15:02

    excellent, this solved my problem too....