Hi,
We are runnung Junos Fusion Ent now and I'd like to filter out some of micellenious message from /var/log/message file.
I have applied match !( xxx) option and I can't see a log on EX9200 switch , but I can see thaose log on our syslog server.
I don't like to see it on syslog server also.
Please give me a piece of advice.
switch>sh log messages | match QSFP | last 10
Sep 26 22:35:43 sd192 spfe[942]: Rear QSFP+ PIC Chan# 2: Tx bias high warning cleared
Sep 26 22:35:43 sd192 spfe[942]: Rear QSFP+ PIC Chan# 2: Rx power low alarm cleared
Sep 26 22:35:43 sd192 spfe[942]: Rear QSFP+ PIC Chan# 2: Rx power low warning cleared
Sep 26 22:35:43 sd192 spfe[942]: Rear QSFP+ PIC Chan# 3: Tx bias low alarm cleared
Sep 26 22:35:43 sd192 spfe[942]: Rear QSFP+ PIC Chan# 3: Tx bias high warning cleared
Sep 26 22:35:43 sd192 spfe[942]: Rear QSFP+ PIC Chan# 3: Tx bias low warning cleared
Sep 26 22:35:43 sd192 spfe[942]: Rear QSFP+ PIC Chan# 3: Rx power high warning cleared
Sep 26 22:35:43 sd192 spfe[942]: Rear QSFP+ PIC Chan# 3: Rx power low warning cleared
Sep 26 22:36:41 sd191 spfe[938]: Rear QSFP+ PIC Chan# 0: Rx power low warning set
But on syslog server ,
|
|
|
|
|
9/27/2018 4:56:42 PM |
|
Critical |
sd192 spfe[942]: Rear QSFP+ PIC Chan# 3: Rx power high warning cleared |
|
9/27/2018 4:56:41 PM |
|
Critical |
sd192 spfe[942]: Rear QSFP+ PIC Chan# 3: Tx bias high alarm cleared |