I am trying to configure pptp on an MX80 but really struggling.
Can anyone either :
A: Post a demo or working config
B: Point me to some reasonably intuitive documentation.
That would be great
Hi , pptp is not supported in Junos . But you can use l2tp/pppoe/ipoe instead
Greetings, Besides not being supported PPTP VPN is a way less secure connection compared to L2TP which is what I would recommend you as an alternative, here you can find a sample of how to go about it:
In case you want to run this oven an IP sec tunnel using an SRX firewall: https://forums.juniper.net/t5/SRX-Services-Gateway/L2TP-over-ipsec-passthrough/td-p/262379
If this solves your problem, please mark this post as "Accepted Solution" so we can help others too \:)/
Lil DexxJNCIE-ENT#863, 3X JNCIP-[SP-ENT-DC], 4X JNCIA [cloud-DevOps-Junos-Design], Champions Ingenius, SSYB
Thank you for the responses. Much appreciated.
I already have L2TP configured for IPv4 and IPv6 and both working as expected.
I was asked initially if I could configure PPPTP (Which I guess is now PPTP) for user who want a secure connection that are not DSL for if they require a VPN. I noticed some options via the services stanza but, as you rightly mentioned, I could only find documentation for SE and SRX hence my question.
I will go back to the customer and ask what they require exactly as there may have been some mis-communication or the wrong perception of what they actually want.