Junos OS

Model: mx480
Junos: 15.1F6.9

MPC-3D-16XGE-SFPP

show configuration interfaces ae1
hierarchical-scheduler maximum-hierarchy-levels 2;
flexible-vlan-tagging;
encapsulation flexible-ethernet-services;
aggregated-ether-options {
lacp {
active;
}
}

show interfaces ae1.2343 extensive
Logical interface ae1.2343 (Index 599) (SNMP ifIndex 6593) (Generation 20131)
Description: 00-HKSRV2343
Flags: Up SNMP-Traps 0x4000 VLAN-Tag [ 0x8100.2343 ] Encapsulation: ENET2
Statistics Packets pps Bytes bps
Bundle:
Input : 378705 13 64023375 17680
Output: 1620540 11 100682344 12296
Adaptive Statistics:
Adaptive Adjusts: 0
Adaptive Scans : 0
Adaptive Updates: 0
Link:
xe-0/3/3.2343 <-- down
Input : 0 0 0 0
Output: 0 0 0 0
xe-2/3/3.2343
Input : 378705 13 64023375 17680
Output: 1620540 11 100682344 12296

Aggregate member links: 2

Marker Statistics: Marker Rx Resp Tx Unknown Rx Illegal Rx
xe-0/3/3.2343 0 0 0 0
xe-2/3/3.2343 0 0 0 0
Egress queues: 8 supported, 4 in use
Queue counters: Queued packets Transmitted packets Dropped packets
0 0 0 0
1 0 0 0
2 0 0 0
3 0 0 0

there are not packet in the hierarchical queue. what's the problem

Hello Xinhui,

MPC-3D-16XGE-SFPP doesn't support hierarchical CoS, because it doesn't have a queueing chip. For example:

"Hierarchical CoS queuing features are supported on interfaces hosted on MICs in MPC1 Q, MPC2 Q, MPC2 EQ, MPC5EQ, MPC7E, MPC8E, and MPC9E line cards" as per Per-Unit Queuing and Hierarchical Queuing for MIC and MPC Interfaces

16x10GE MPC is also listed in Scaling of Per-VLAN Queuing on Non-Queuing MPCs

Best regards,

Sergii

-------------------------------------------------------------------

Please accept the solution if your problem is resolved

-------------------------------------------------------------------