Does anyone know if the ACX series (2100) supports LAG?
Looking at the Juniper website it suggests it's only available on MX and EX series devices, but some of the commands seem to be available on the ACX.
Can anyone point me in the right directions for configuraiton (if it's possible)
LAG has been supported on ACX2100 since 12.3X52-D10: https://pathfinder.juniper.net/feature-explorer/feature-info.html?fKey=1138&fn=Link+aggregation+groups+(LAGs)
Configuration guide for LAG (aggregated ethernet) interfaces: https://www.juniper.net/documentation/en_US/junos/topics/task/configuration/link-aggregation-cli.html
and if you need LACP (guess you will), then have a look at: https://www.juniper.net/documentation/en_US/junos/topics/task/configuration/interfaces-configuring-aggregated-ethernet-lacp.html
Thanks for the reply.
That's the first time I've seen this Feature Explorer section on the website, very useful.
I will be bookmarking this for future use.