Junos OS

Expand all | Collapse all

EX4200 stuck on root> can not commit

Jump to Best Answer
  • 1.  EX4200 stuck on root> can not commit

    Posted 03-20-2015 08:29

    Hello,

     

    I have a question i have ex4200 whenever i go to cli mode i am getting following messge:

    "

    warning: This chassis is operating in a non-master role as part of a virtual-chassis (VC) system.
    warning: Use of interactive commands should be limited to debugging and VC Port operations.
    warning: Full CLI access is provided by the Virtual Chassis Master (VC-M) chassis.
    warning: The VC-M can be identified through the show virtual-chassis status command executed at this console.
    warning: Please logout and log into the VC-M to use CLI.

    "

    when i run command that show virtual-chasis status i am getting following:

     

    "

    root> show virtual-chassis status
    error: the virtual-chassis-control subsystem is not running

    {linecard:0}
    root>

    "

     

    My configuration is as follows:

     

    root> show configuration | display set
    set system syslog user * any emergency
    set system syslog file messages any notice
    set system syslog file messages authorization info
    set system syslog file interactive-commands interactive-commands any
    set system commit factory-settings reset-chassis-lcd-menu
    set system commit factory-settings reset-virtual-chassis-configuration
    set interfaces ge-0/0/0 unit 0 family ethernet-switching
    set interfaces ge-0/0/1 unit 0 family ethernet-switching
    set interfaces ge-0/0/2 unit 0 family ethernet-switching
    set interfaces ge-0/0/3 unit 0 family ethernet-switching
    set interfaces ge-0/0/4 unit 0 family ethernet-switching
    set interfaces ge-0/0/5 unit 0 family ethernet-switching
    set interfaces ge-0/0/6 unit 0 family ethernet-switching
    set interfaces ge-0/0/7 unit 0 family ethernet-switching
    set interfaces ge-0/0/8 unit 0 family ethernet-switching
    set interfaces ge-0/0/9 unit 0 family ethernet-switching
    set interfaces ge-0/0/10 unit 0 family ethernet-switching
    set interfaces ge-0/0/11 unit 0 family ethernet-switching
    set interfaces ge-0/0/12 unit 0 family ethernet-switching
    set interfaces ge-0/0/13 unit 0 family ethernet-switching
    set interfaces ge-0/0/14 unit 0 family ethernet-switching
    set interfaces ge-0/0/15 unit 0 family ethernet-switching
    set interfaces ge-0/0/16 unit 0 family ethernet-switching
    set interfaces ge-0/0/17 unit 0 family ethernet-switching
    set interfaces ge-0/0/18 unit 0 family ethernet-switching
    set interfaces ge-0/0/19 unit 0 family ethernet-switching
    set interfaces ge-0/0/20 unit 0 family ethernet-switching
    set interfaces ge-0/0/21 unit 0 family ethernet-switching
    set interfaces ge-0/0/22 unit 0 family ethernet-switching
    set interfaces ge-0/0/23 unit 0 family ethernet-switching
    set interfaces ge-0/1/0 unit 0 family ethernet-switching
    set interfaces xe-0/1/0 unit 0 family ethernet-switching
    set interfaces ge-0/1/1 unit 0 family ethernet-switching
    set interfaces xe-0/1/1 unit 0 family ethernet-switching
    set interfaces ge-0/1/2 unit 0 family ethernet-switching
    set interfaces xe-0/1/2 unit 0 family ethernet-switching
    set interfaces ge-0/1/3 unit 0 family ethernet-switching
    set protocols igmp-snooping vlan all
    set protocols rstp
    set protocols lldp interface all
    set protocols lldp-med interface all
    set ethernet-switching-options storm-control interface all
    set poe interface all

     

     

     

    THis switch is not stack switch do not ahve any other members it is stand alone. 

    I would like to install new JunOS on it but only i have is console access. I do not see interfaces nor ips. 

    I need help pleaseeeeeeeee......

     

     

    LG


    #JUNOS
    #ex4200


  • 2.  RE: EX4200 stuck on root> can not commit

     
    Posted 03-23-2015 03:51

    Can you do a "> request virtual-chassis reactivate"?


    =====

    If this worked for you please flag my post as an "Accepted Solution" so others can benefit. A kudo would be cool if you think I earned it.



  • 3.  RE: EX4200 stuck on root> can not commit
    Best Answer

    Posted 04-15-2015 20:08

    Rebooting switch resolved this issue....



  • 4.  RE: EX4200 stuck on root> can not commit

    Posted 09-03-2018 03:17

    I have the same issue but it not solved by rebboot ?

     



  • 5.  RE: EX4200 stuck on root> can not commit

     
    Posted 09-03-2018 05:03

    Ahmad,

     

    Is the switch a member of a virtual chassis?

    Then this could be normal for a member not actiing as the RE.

     

    If not, it might have been a member of a virtual chassis that you are now trying to use separately?

    In that case zeroize and reset will likely put this in a condition you can continue to configure.

     

    If it is some other scenario, outline what you have.