Realy appriciate your inputs KamilD. Thanks.
Let me explain further.
I have created this routing instance
{master}[edit routing-instances PPPoe-Internet]
juniper@SLIC-MEDG-003# show
instance-type vrf;
interface ge-1/0/0.107;
interface xe-4/1/1.14;
interface lo0.14;
route-distinguisher 65001:1120014003;
vrf-target target:65001:1120014003;
vrf-table-label;
protocols {
bgp {
group IGW-SLIC {
type external;
peer-as 45678;
neighbor 10.12.2.250;
}
}
}
Now ge-1/0/0.107 and interface lo0.14 are in the routing-instances PPPoe-Internet.
Routing table routing-instances PPPoe-Internet
PPPoe-Internet.inet.0: 4 destinations, 4 routes (4 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
0.0.0.0/0 *[BGP/170] 00:26:30, localpref 100
AS path: 45678 18936 I, validation-state: unverified
> to 10.12.2.250 via xe-4/1/1.14
10.12.0.100/32 *[Direct/0] 00:14:38
> via lo0.14
10.12.2.248/29 *[Direct/0] 00:28:10
> via xe-4/1/1.14
10.12.2.249/32 *[Local/0] 00:28:10
Local via xe-4/1/1.14
I want my subcribers interfaces appear in routing-instances PPPoe-Internet.
But subscriber interfaces still can be seen in inet.0
juniper@SLIC-MEDG-003# run show route | match 119.235.12.6
inet.0: 70 destinations, 71 routes (70 active, 0 holddown, 0 hidden)
Restart Complete
+ = Active Route, - = Last Active, * = Both
119.235.12.6/32 *[Access-internal/12] 00:01:17
> via pp0.1073742047
How can I assign dynamic-profile; i.e pp0.xxxxx to sepcific routing instance? Which knob should I enable?
Thanks again.