Junos OS

 View Only
last person joined: 2 days ago 

Ask questions and share experiences about Junos OS.
  • 1.  MPC 3D 16x 10GE rebooted

    Posted 10-18-2020 02:26
      |   view attached

    Hello guys

    Juniper MX960 version 18.4R3

    I had a flap of a whole MPC 3D 16x 10GE. 

    The router is terminating DHCP clients ~25k. ~45Gbit traffic go thru.

    This is the first time that happened 

    I have attached logs

    I would be very appreciated of any advice

    Thanks

    Attachment(s)

    txt
    Log_juniper_forum.txt   6 KB 1 version


  • 2.  Re: MPC 3D 16x 10GE rebooted

    Posted 10-18-2020 07:55

    Hi, these logs matched to one of internal PR , you can open case to JTAC and they will recommend you sw version where this PR fixed

     

    P.S. MPC 3D 16x 10GE is not officially supported for Subscriber Management 



  • 3.  Re: MPC 3D 16x 10GE rebooted

    Posted 10-18-2020 09:54

     

    Could you tell me the content of the PR and recommended version?

    I do not have access to JTAC

     

    I  would be very pleased