Junos OS

 View Only
last person joined: yesterday 

Ask questions and share experiences about Junos OS.

  • 1.  Interface st0.100 does not have multipoint set, but uses a gateway that uses xauth

    Posted 11-02-2020 12:25

    Hi all

     

    i am stuck with somehting and i cannot work it out. i am trying to set up Route based Client VPN. i am getting to the Phase 2 and i am getting the error message Interface st0.100 does not have multipoint set, but uses a gateway that uses xauth. i cannot see what i have not done correct.

    i have another SRX300 and i put the exact same rules in and i do not get the error.

     

    any assistance would be great

    Thanks,



  • 2.  Re: Interface st0.100 does not have multipoint set, but uses a gateway that uses xauth

     
    Posted 11-04-2020 03:12

    Hi,

    - same JUNOS version?

    - and wrt "I put the exact same rules": This SRX could have more configuration than the other. Please also check that.

    Regards

    Ulf



  • 3.  Re: Interface st0.100 does not have multipoint set, but uses a gateway that uses xauth

    Posted 11-05-2020 01:58

    yes its the exact same version. 

    i copied the config from one SRX to the other so are the same 

     

    Thanks