Hello,
I need a bit of help to clarify the troubleshooting/configuration issues related to the Pro-Active Loss/Delay measurements.
The reference I was using is:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/mpls-statistics.html#jd0e248
The configuration example looks very straight forward, however, I do not see any results after issuing "show performance-monitoring mpls lsp"
The main difference between the example and my test environment is:
______________________________________
user@R1# show chassis
network-services enhanced-ip;
______________________________________
In my case I have enhanced-ethernet.
I am looking for your support to understand:
- if this is a correct approach/directions if I am interesting to have Loss/Delay information about my LSPs (the network itself will have more then 1000 LSPs, so the performance is really a challenge)
- Was anybody able to reproduce this in the live environment?
- Is the enhanced-ip - is critical in this case?
- Any "how to debug this" advises?
Thank you and all the best.
Andrei