Data Center

 View Only
last person joined: 10 days ago 

Ask questions and share experiences about Data Center Architecture and approaches.
  • 1.  Does vQFX support ZTP ?

    Posted 08-31-2021 05:47
    I watched a video from Youtube  for ZTP.  Seems request system zeroize will initial ZTP.  I am trying to test on vQFX. It receives IP from DHCP, but I does not receive the configuration file.

    I checked the initial config to notice it does not contain set chassis auto-imgae-upgrade.  if I add this, then I have to set root password for commit. Then the device does not count to be factory default. right ?

    thanks !!


  • 2.  RE: Does vQFX support ZTP ?
    Best Answer

    Posted 08-31-2021 06:02
    This document lists the platforms and version start for what supports ztp.

    https://www.juniper.net/documentation/us/en/software/junos/junos-install-upgrade/topics/topic-map/zero-touch-provision.html

    I don't see any of the virtual platforms listed.

    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
    http://puluka.com/home
    ------------------------------



  • 3.  RE: Does vQFX support ZTP ?

    Posted 08-31-2021 10:48
    thanks so much !!
    last night, I came across this. ZTP With VQFX-1K.  I tried and seemed working. But a little way.   I have to add chassis auto-image-upgrade and root password. Then it retrieved the configuration file from ftp server which was specified in dhcp server.

    Now I am trying to find some sample with transfer-mode is http.