Data Center

 View Only


This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.

  • 1.  Does vQFX support ZTP ?

    Posted 08-31-2021 05:47
    I watched a video from Youtube  for ZTP.  Seems request system zeroize will initial ZTP.  I am trying to test on vQFX. It receives IP from DHCP, but I does not receive the configuration file.

    I checked the initial config to notice it does not contain set chassis auto-imgae-upgrade.  if I add this, then I have to set root password for commit. Then the device does not count to be factory default. right ?

    thanks !!

  • 2.  RE: Does vQFX support ZTP ?
    Best Answer

    Posted 08-31-2021 06:02
    This document lists the platforms and version start for what supports ztp.

    I don't see any of the virtual platforms listed.

    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)

  • 3.  RE: Does vQFX support ZTP ?

    Posted 08-31-2021 10:48
    thanks so much !!
    last night, I came across this. ZTP With VQFX-1K.  I tried and seemed working. But a little way.   I have to add chassis auto-image-upgrade and root password. Then it retrieved the configuration file from ftp server which was specified in dhcp server.

    Now I am trying to find some sample with transfer-mode is http.