If I need two vni to use the same vrf-target, can I do the following?
set routing-instances evpn1 protocols evpn vni-options vni 11 vrf-target target:11:12
set routing-instances evpn1 protocols evpn vni-options vni 12 vrf-target target:11:12
When I did this, the VGW is rejected as follows:
10.150.101.250/32 *[Local/0] 02:02:10
Reject
10.150.101.254/32 *[Local/0] 02:02:10
Reject
10.150.102.250/32 *[Local/0] 02:02:10
Reject
10.150.102.254/32 *[Local/0] 02:02:10
Reject
when I used different vrf-target for each vni. VGWs are up.
Any documentation discusses this ?
thanks a lot in advance !!