Data Center

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



question for vni-options and virtual gateway for vxlan

  • 1.  question for vni-options and virtual gateway for vxlan

    Posted 27 days ago
    If I need two vni to use the same vrf-target, can I do the following?
    set routing-instances evpn1 protocols evpn vni-options vni 11 vrf-target target:11:12
    set routing-instances evpn1 protocols evpn vni-options vni 12 vrf-target target:11:12
    ​

    When I did this, the VGW is rejected as follows:

    10.150.101.250/32  *[Local/0] 02:02:10
                          Reject
    10.150.101.254/32  *[Local/0] 02:02:10
                          Reject
    10.150.102.250/32  *[Local/0] 02:02:10
                          Reject
    10.150.102.254/32  *[Local/0] 02:02:10
                          Reject
    

    when I used different vrf-target for each vni.  VGWs are up.

    Any documentation discusses this ?

    thanks a lot in advance !!