Data Center

 View Only


This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.

Expand all | Collapse all

EVPN-VXLAN using duplicate VLANs on QFX5120

This thread has been viewed 11 times
  • 1.  EVPN-VXLAN using duplicate VLANs on QFX5120

    Posted 06-15-2021 05:00
    I was hoping to allow different tenants to use the same VLAN. On the MX this seems to be possible by creating bridging domains in virtual switches but the 'virtual-switch' instance-type does not appear to be available within Junos. I am using 20.2R3.9.

    lab@QFX5120-1# set routing-instances test instance-type ?
    Possible completions:
    evpn-vpws                                         EVPN VPWS routing instance
    mpls-internet-multicast            Internet Multicast over MPLS routing instance
    virtual-router                                 Virtual routing instance
    vrf                                                         Virtual routing forwarding instance

    Are multiple bridging domains supported?

    Thanks for looking :)

    JNCIE-ENT #552

  • 2.  RE: EVPN-VXLAN using duplicate VLANs on QFX5120

    Posted 06-15-2021 11:11

    This is supported on MX etc. but not on QFX5K:


    Hope this helps.







    If this solves your problem, please mark this post as "Accepted Solution."

    Kudos are always appreciated :).


    Sent from Mail for Windows 10


    Juniper Business Use Only