Data Center

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



Expand all | Collapse all

Influence DF Election for ESI on QFXs

  • 1.  Influence DF Election for ESI on QFXs

    Posted 02-27-2021 21:58

    I have a scenario where I have 2, but could end up being 3 leaves(leaf switches) that will belong to the same ESI.  I want to be able to control which of one of these 2(or3) leaves will be the elected DF(designated forwarder).  I know on the MXs, there is a knob that allows for changing the DF election algorithm from mod-based to being preference based that I've tested  and it works, but on the QFX's this knob does not exist.  How can I influence the DF election process on the QFXs?  I've read over the RFCs on this as well as the EVPN Guide which can be found here:

    https://www.juniper.net/documentation/en_US/junos/topics/concept/evpn-bgp-multihoming-overview.html#jd0e1017

    Thanks in advance to any insight provided!!



  • 2.  RE: Influence DF Election for ESI on QFXs

    Posted 03-02-2021 10:27
    Hi Steve,
    You're right, preference-based DF election is not supported on QFX as of today, so DF election follows the algorithm described in RFC7432.
    Best Regards
    Ridha

    ------------------------------
    Ridha Hamidi
    ------------------------------