Data Center

 View Only
last person joined: 10 days ago 

Ask questions and share experiences about Data Center Architecture and approaches.
  • 1.  SRX345 + EX2300 datacenter vlan tunneling

    Posted 04-14-2021 10:59
      |   view attached
    Hi

    I'm trying to setup a lab for a customer with 3 small datacenters on 3 different locations.
    On each site we have one SRX345 + one EX2300
    They have one ESX (Vmware) on each site, and all must be on the same vlan and each VM must other VM in vlan as they where on same L2 (even if they are remote)
    So for example VM1 arp table must show VM2 and VM3
    And VM10 arp table must show VM12 and VM13



    thanks for your help and advice !


  • 2.  RE: SRX345 + EX2300 datacenter vlan tunneling

    Posted 04-15-2021 06:00
    If you are able to signal an lsp across your WAN cloud, you could create an l2circuit between sites.  This could connect two ports in different physical locations as if they are cabled layer 2.  You treat those ports as a virtual ethernet cable linking the switches you connect to them between the two sites.  The connected ports can be normal trunk ports with whatever vlans you want to extend between the sites.

    https://www.juniper.net/documentation/us/en/software/junos/mpls/topics/task/mpls-l2-circuit-cli.html

    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
    http://puluka.com/home
    ------------------------------