Antennas are compatible as long as the connector and impedance are correct from any vendor.
I've heard verbally in some of the webinars that Mist AP were designed to be able to use Cisco mounting hardware to assist with direct transitions. I've also had that experience with other vendors too.
------------------------------
Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
http://puluka.com/home------------------------------
Original Message:
Sent: 06-24-2021 15:40
From: JACK LAN
Subject: Can Cisco External Antennas & Mounting hardware be used with Mist APs
They look like the same and hence was just curious if Cisco External Antennas & Mounting hardware be used with Mist APs!
------------------------------
JACK LAN
------------------------------