vMX

Expand all | Collapse all

chassis pfc 0 stratus Present

Jump to Best Answer
  • 1.  chassis pfc 0 stratus Present

    Posted 07-14-2019 04:16

    I don't know why but when I write the command show chassis fpc I see that:

    vpc.PNG

    someone know why?



  • 2.  RE: chassis pfc 0 stratus Present

    Posted 07-14-2019 04:46

    Hi, Do you see the PIC under "show chassis hardware" ?

    Also try changing the fpc mode to lite-mode "set chassis fpc 0 lite-mode" and see if PICs come online.

     

    //QZ



  • 3.  RE: chassis pfc 0 stratus Present

    Posted 07-14-2019 05:44

    I don`t see PIC when I write: "show chassis hardware".

    And after I change it to lite mode is still in that state.

     

    1.PNG



  • 4.  RE: chassis pfc 0 stratus Present

    Posted 07-14-2019 05:48

    Hi, In that case can you check below log for any indicators.
    show chassis log |  match "fpc 0"

     

    Additionally, get console log of fpc vm; 

     

    //QZ



  • 5.  RE: chassis pfc 0 stratus Present

    Posted 07-14-2019 06:12
      |   view attached

    I write that command: "show log chassisd | match fpc"

    I added the log

     

     

    Attachment(s)

    txt
    logs.txt   82K 1 version


  • 6.  RE: chassis pfc 0 stratus Present

    Posted 07-14-2019 20:53

    It seems like FPC is not initialising completely 

     

    Jul 14 11:45:17 CHASSISD_FRU_UNRESPONSIVE: Error for FPC 0: unresponsive to attempts to start it; left it offline
    Jul 14 11:45:17 CHASSISD_FRU_OFFLINE_NOTICE: Taking FPC 0 offline: Error
    Jul 14 11:45:17 fpc_down slot 0 reason Error cargs 0x0
    Jul 14 11:45:17 fpc_offline_now - slot 0, reason: Error, error Unresponsive transition state 1
    Jul 14 11:45:17 fpc_atlas_snmp_get_led_state FPC 0: LED idx2 0 color blinking green value 8
    Jul 14 11:45:17 i2cs_virtual_power_off Powered OFF FPC 0, bitmap 0
    Jul 14 11:45:17 FPC#0 - power off [addr 0x11] reason: Error
    Jul 14 11:45:17 CHASSISD_SNMP_TRAP10: SNMP trap generated: FRU power off (jnxFruContentsIndex 7, jnxFruL1Index 1, jnxFruL2Index 0, jnxFruL3Index 0, jnxFruName FPC: Virtual FPC @ 0/*/*, jnxFruType 3, jnxFruSlot 0, jnxFruOfflineReason 3, jnxFruLastPowerOff 246325, jnxFruLastPowerOn 186317)
    Jul 14 11:45:17 CHASSISD_SNMP_TRAP10: SNMP trap generated: Fru Offline (jnxFruContentsIndex 7, jnxFruL1Index 1, jnxFruL2Index 0, jnxFruL3Index 0, jnxFruName FPC: Virtual FPC @ 0/*/*, jnxFruType 3, jnxFruSlot 0, jnxFruOfflineReason 3, jnxFruLastPowerOff 246325, jnxFruLastPowerOn 186317)
    Jul 14 11:45:17 fpc_atlas_snmp_get_led_state FPC 0: LED idx2 0 color off value 7
    Jul 14 11:45:17 fpc_offline_now - slot 0, is_resync_ready cleared
    Jul 14 11:45:17 fpc/pic 0/0: No handle for i2c_id 0x0
    Jul 14 11:45:17 fpc/pic 0/1: No handle for i2c_id 0x0
    Jul 14 11:45:17 fpc/pic 0/2: No handle for i2c_id 0x0
    Jul 14 11:45:17 fpc/pic 0/3: No handle for i2c_id 0x0
    Jul 14 11:45:17 hwdb: entry for fpc 2986 at slot 0 deleted
    Jul 14 11:45:17 send: red alarm set, device FPC 0, reason FPC 0 Hard errors

    .....

    Jul 14 11:50:14 CHASSISD_UNSUPPORTED_FPC: FPC with I2C ID of 0xbaa is not supported

     

    I suspect this could be related to vmx version ? Did you by any chance perfrom a cli upgrade ?

    If not, just for troubleshooting sake config fpc in lite-mode and restart vmx entirety.

     

    //QZ



  • 7.  RE: chassis pfc 0 stratus Present

    Posted 07-14-2019 23:32

    Hi ,

     

    Please confirm the hypervisor used and also vCPU & memeory allocated for vCP & vFP.



  • 8.  RE: chassis pfc 0 stratus Present

    Posted 07-14-2019 23:47

    Hi,

     

    PFE in Present state can have many reasons.

    Ranging from incorrect interface parameters, prodecure to upgrade to underlying host issues to any detail missing or incorrect in XML of the vMX VM

     

     

    Taking a back step:-

    1. How did you end up in the said state ?

    2. Was this working and then went into the state after a said change ?

    3. What is the XML of the said vMX VM ? On what base are you running the said VM?

     

    -Rahul



  • 9.  RE: chassis pfc 0 stratus Present

    Posted 07-15-2019 03:59

    1. After I installed the two machines and configure them, I checked if the riot prosses is running with the command: "show chassis hardware". When I saw that is don`t running I checked the fpc and I saw that state.

    2. From the beginning, it did not work

    3. On which XML are you talking about? I running the machine on ESXI.



  • 10.  RE: chassis pfc 0 stratus Present
    Best Answer

    Posted 07-27-2019 23:59

    Need to add more memory and CPU to the machine then pfc 0 stratus change to online.