vMX

Expand all | Collapse all

Change data port em to ge?

Jump to Best Answer
  • 1.  Change data port em to ge?

    Posted 07-09-2020 20:12

    Hi everybody,

    On my vMX ( running on ESXI) data ports are shown as em:

    Junos version :18.2R1.9

    Capture-11.PNG

    is there anyway  can we change them to ge?

    Thanks and have a good day!!

     



  • 2.  RE: Change data port em to ge?
    Best Answer

    Posted 07-09-2020 20:23

    Hi sarahr202,

     

    Could you confirm if the port configuration on your VM is correct? The below link should help-

    https://www.juniper.net/documentation/en_US/vmx/topics/task/configuration/vmx-chassis-active-ports-configuring.html

     

    Also, I found an old discussion where this issue was solved. You may be facing the same condition, please check-

    https://forums.juniper.net/t5/vMX/vMx-only-showing-quot-em-quot-interfaces/td-p/287224

     

    Hope this helps 🙂

     

    Please mark "Accepted Solution" if this helps you solve your query. Kudos are always appreciated!



  • 3.  RE: Change data port em to ge?

    Posted 07-09-2020 20:23

    Hi , are you sure that all these interfaces connected to vPFE and not to vRE ? 

    attach show chassis hardware output plz