vMX

 View Only
last person joined: 10 days ago 

Ask questions and share experiences about vMX.
  • 1.  Can I use both ms interface and lt interface on vMX?

    Posted 10-02-2018 22:38

    I was succeeded to deploy vMX with virtual MS-MPC and could see the ms interface on it.
    However I couldn't use the lt(logical tunnel) interface on it even though I set it.

     

    [edit]
    root# show chassis | display set
    set chassis fpc 0 pic 0 tunnel-services ban
    set chassis fpc 0 performance-mode
    set chassis network-services enhanced-ip
    
    [edit]
    root# run show interfaces terse | match lt-

     

     

    Once I booted up without vMS-MPC setting, I could use lt interface but couldn't use ms interface.

     

    Is there a way to use both?

     



  • 2.  RE: Can I use both ms interface and lt interface on vMX?

    Posted 10-02-2018 23:05

    Hello,

    How many virtual PICs do You have? Please show us

     

    show chassis fpc pic-status

    If You have >1 PIC then You could assign "tunnel-services" to another PIC, not 0.

     

    And if You have only 1 PIC on FPC 0 then I suggest to add 1 more vFPC (FPC 1) and use "tunnel-services" on it.

     

    HTH

    Thx
    Alex



  • 3.  RE: Can I use both ms interface and lt interface on vMX?

    Posted 10-02-2018 23:30

     

    Thanks for reply.

    The command result is as follows.

     

    [edit]
    root# run show chassis fpc pic-status
    Slot 0   Online       MS-MPC
      PIC 0  Online       Virtual
      PIC 2  Online       MS-MPC-PIC
    

     

    I tried to add config  of pic 2 but couldn't see lt interface as well .. 

     

    [edit]
    root# show chassis | display set
    set chassis fpc 0 pic 0 tunnel-services bandwidth 10g
    set chassis fpc 0 pic 2 tunnel-services bandwidth 10g
    set chassis fpc 0 performance-mode
    set chassis network-services enhanced-ip
    
    [edit]
    root# run show interfaces terse | match lt-
    

     

     

    Could you please tell me the method or the document to help me realize your proposal?

    >And if You have only 1 PIC on FPC 0 then I suggest to add 1 more vFPC (FPC 1) and use "tunnel-services" on it.

     

    Nozomi

     



  • 4.  RE: Can I use both ms interface and lt interface on vMX?
    Best Answer

    Posted 10-02-2018 23:47


  • 5.  RE: Can I use both ms interface and lt interface on vMX?

    Posted 10-03-2018 00:08

    Thanks, I'll try reading it.

     



  • 6.  RE: Can I use both ms interface and lt interface on vMX?

    Posted 07-12-2020 06:31

    Hi Sasaki,

     

    May i know how u can enable that vMS-PIC? Do u use EVE-NG or not?

     

     

    Thanks and appreciate your feedback