vMX

 View Only
last person joined: 9 days ago 

Ask questions and share experiences about vMX.
Expand all | Collapse all

vMX can't connect fpc,slot 0 Absent

  • 1.  vMX can't connect fpc,slot 0 Absent

    Posted 10-01-2016 22:26

    Hello,

    I'm running VMX on my Ubuntu(Install Ubuntu on EXSI 5.5). VCP et VFP are running (cf below),but can't find interface ge port ,did any help to check it.

    Thanks

     

    Attach for reference:

    admin@vmx1> show chassis fpc
    Temp CPU Utilization (%) CPU Utilization (%) Memory Utilization (%)
    Slot State (C) Total Interrupt 1min 5min 15min DRAM (MB) Heap Buffer
    0 Present Absent

    admin@vmx1> show chassis hardware
    Hardware inventory:
    Item Version Part number Serial number Description
    Chassis VMX755c VMX
    Midplane
    Routing Engine 0 RE-VMX
    CB 0 VMX SCB
    CB 1 VMX SCB
    FPC 0 Virtual FPC
    CPU

     

     


    vodatel@vmx-dayone-1:~/vmx-15.1F4-3$ sudo virsh net-dumpxml br-ext
    <network>
    <name>br-ext</name>
    <uuid>0e0ca463-a184-497c-868e-e127beecc308</uuid>
    <forward mode='route'/>
    <bridge name='br-ext' stp='on' delay='0'/>
    <mac address='52:54:00:9f:a0:77'/>
    <ip address='192.168.88.194' netmask='255.255.255.0'>
    <dhcp>
    <host mac='0A:00:DD:C0:DE:0E' name='vcp-vmx1' ip='192.168.88.11'/>
    <host mac='0A:00:DD:C0:DE:10' name='vfp-vmx1' ip='192.168.88.15'/>
    </dhcp>
    </ip>
    </network>

    Attachment(s)

    zip
    vfp log.zip   101 KB 1 version
    zip
    vcp coredump.zip   911 KB 1 version


  • 2.  RE: vMX can't connect fpc,slot 0 Absent

    Posted 10-02-2016 20:43

    Try this:

     

    "set chassis fpc 0 lite-mode"

     

    If this works, problem is with Memory or/and CPU.



  • 3.  RE: vMX can't connect fpc,slot 0 Absent

    Posted 10-23-2021 08:56
    Bingo!
    Changing FPC to lite-mode worked.
    I have raised memory to 16GB for vCP and 16GB for vFPC and FPC won't get online.
    Keeps show FPC as PRESENT and not online.
    Don't know what to do here...

    ------------------------------
    Rafael Azevedo
    ------------------------------



  • 4.  RE: vMX can't connect fpc,slot 0 Absent

    Posted 10-23-2021 08:56
    This solution worked for me.
    FPC and CP won't connect to each other if not using lite-mode.
    I've added 16gb and 16 procs on each and it still won't work.
    Don't really know how to run on performance-mode since it won't work. I guess there is a problem with this performance mode.
    Cheers.

    ------------------------------
    Rafael Azevedo
    ------------------------------



  • 5.  RE: vMX can't connect fpc,slot 0 Absent

    Posted 10-11-2016 21:59
    still offline ,but ping vfp ip okay


  • 6.  RE: vMX can't connect fpc,slot 0 Absent

    Posted 10-12-2016 01:11


  • 7.  RE: vMX can't connect fpc,slot 0 Absent

    Posted 10-12-2016 03:58

    Hi,

     

    Are you able to ping the VFP from the VCP over the internal bridge (not management link)  please can you provide output showing this

     

    On 15.1 / 16.1 the command is

    ping 128.0.0.16 routing-instance __juniper_private1__

     

    Thanks



  • 8.  RE: vMX can't connect fpc,slot 0 Absent

    Posted 10-26-2016 03:19

    Dear 



  • 9.  RE: vMX can't connect fpc,slot 0 Absent

    Posted 10-26-2016 03:39

    Please can you confirm how much memory you have allocated to the VCP and VFP?



  • 10.  RE: vMX can't connect fpc,slot 0 Absent

     
    Posted 10-26-2016 08:23

    Having exactly the same issue running under KVM (Linux kernel 4.4) running in lite mode, 1 vCPU allocated to vCP and 3 vCPU allocated to vFP with 2GB/8GB memory allocated respectively.

     

    Basic connectivity between them seems to be fine, the vCP and vFP just never connect. Physical host is a dual Xeon E5-2630v2 with 256GB memory, nothing else running on it. Problem only seems to have started after someone did an apt-get -y update && apt-get -y upgrade on the box.

     

    root> ping 128.0.0.16 routing-instance __juniper_private1__
    PING 128.0.0.16 (128.0.0.16): 56 data bytes
    64 bytes from 128.0.0.16: icmp_seq=0 ttl=64 time=0.329 ms
    64 bytes from 128.0.0.16: icmp_seq=1 ttl=64 time=0.437 ms
    64 bytes from 128.0.0.16: icmp_seq=2 ttl=64 time=0.416 ms
    ^C
    --- 128.0.0.16 ping statistics ---
    3 packets transmitted, 3 packets received, 0% packet loss
    round-trip min/avg/max/stddev = 0.329/0.394/0.437/0.047 ms

    root>



  • 11.  RE: vMX can't connect fpc,slot 0 Absent

    Posted 10-26-2016 08:38

    If you log in to the VFP console, what do you see in the crash logs (/var/crash) ?

     

    Also if you look in the VFP syslog file in /var/log/messages do you see the below?

    RPIO: Accepted connection from 128.0.0.1:50896 <-> vPFE:3000
    RPIO: Accepted connection from 128.0.0.1:56098 <-> vPFE:3000
    HOSTIF: Accepted connection

     

    Also note that JTAC will only support the following OS/Kernel versions for vMX

    Ubuntu 14.04 LTS (recommended host OS)
    Linux 3.13.0-32-generic

    QEMU-KVM 2.0.0+dfsg-2ubuntu1.11 or later

     

    Red Hat Enterprise Linux 7.2
    Linux 3.10.0-327.4.5 or later

    QEMU-KVM 1.5.3 or later



  • 12.  RE: vMX can't connect fpc,slot 0 Absent

     
    Posted 10-26-2016 09:30

    Ok so have found the underlying issue, the vMX configuration has the following parameters in it;

     

    FORWARDING_PLANE:
    memory-mb : 8192
    vcpus : 3

     

    Yet it seems to only be booting with 1 vCPU;

     

    root@localhost:~# lscpu
    Architecture: x86_64
    CPU op-mode(s): 32-bit, 64-bit
    Byte Order: Little Endian
    CPU(s): 1

    On-line CPU(s) list: 0
    Thread(s) per core: 1
    Core(s) per socket: 1
    Socket(s): 1
    NUMA node(s): 1

     

    root@localhost:~# cat /var/log/messages | grep CPU

    Oct 26 15:49:22 localhost user.notice root: vFP Error! Insufficient number of CPUs 1

     

    Same issue present on an Ubuntu 14.04 LTS 3.13.0 kernel box running QEMU 2.6.0.



  • 13.  RE: vMX can't connect fpc,slot 0 Absent

    Posted 07-26-2017 08:57

    I see a similar problem - although I am running directly on ESXi (using the OVAs supplied by Juniper). 

     

    My /var/log/messages | grep CPU also shows this message:

    vFP Error! Insufficient CPUs

     

    However, I have 7 cores assigned to it in ESXi (lscpu confirms this).. Not sure what the issue _really_ is, but I seem to have had more success moving the assigned RAM for the vFPC up to 16GB (it was at 8GB). This is all on a trial license, that could be something to do with it as well. 

     

    I first had an issue in that I could ping between the VCP and VFPC just fine, but I was always seeing FPC 0 as 'Absent' in 'show chassis fpc'. Now (having added double the RAM) - I can see my FPC 0 there, in 'Online   Testing' state.. ge-0/0/0 appears to be up, so I'll move on carefully from here.

     

    Thanks for the tips in this thread. 



  • 14.  RE: vMX can't connect fpc,slot 0 Absent

    Posted 09-12-2017 05:09

    Add vMX 60-days trial license and check. 



  • 15.  RE: vMX can't connect fpc,slot 0 Absent

    Posted 02-23-2018 06:31

    I have a similiar issue on vMX 14.1R1.10 .

     

    On my Fusion I can see PIC 0 being listed on show chassis fpc pic-status  and on show chassis hardware .

     

    Then exported the vMX vm with cli ovftool and imported into Cloudshare cloud provider, that pretty much is a huge ESX server.

     

    There I cannot see PIC 0 and no ge-* interfaces are present.

     

    There's no lite command available and vMX trial from Juniper site cannot be installed as being detected as invalid.

     

     



  • 16.  RE: vMX can't connect fpc,slot 0 Absent

    Posted 10-26-2016 09:11

    If you may share /var/log on both vCP and vFP?



  • 17.  RE: vMX can't connect fpc,slot 0 Absent

    Posted 04-27-2019 01:12

    Trying to restart an old thread before starting a new one...

     

    Did you find a solution to this?  I have the same issue with a vMX running 17.4R3-S2.  The FPC shows as present but absent.  I can ping between the two VMs and I have tried to increase the RAM to 8G (doc say 2G is enough for lite-mode).  A have a vMX running on 15.1 with the same set up and that is working so not sure what else to try.

     

    <edit>

    In the log messages on the VCP I can see the following:

    .....
    Apr 27 08:32:48   fpc0 afi-server: luchip_client_start: trying server connection, attempt 586
    Apr 27 08:32:49   fpc0 afi-server: luchip_client_start: trying server connection, attempt 587
    Apr 27 08:32:50   fpc0 afi-server: luchip_client_start: trying server connection, attempt 588
    Apr 27 08:32:51   fpc0 afi-server: luchip_client_start: trying server connection, attempt 589
    Apr 27 08:32:52   fpc0 afi-server: luchip_client_start: trying server connection, attempt 590
    Apr 27 08:32:53   chassisd[5430]: CHASSISD_FRU_UNRESPONSIVE: Error for FPC 0: unresponsive to attempts to start it; left it offline
    Apr 27 08:32:53   chassisd[5430]: CHASSISD_FRU_OFFLINE_NOTICE: Taking FPC 0 offline: Error
    Apr 27 08:32:53   chassisd[5430]: CHASSISD_SNMP_TRAP3: ENTITY trap generated: entStateOperDisabled (entPhysicalIndex 20, entStateAdmin 4, entStateAlarm 6)
    Apr 27 08:32:53   chassisd[5430]: CHASSISD_SNMP_TRAP0: ENTITY trap generated: entConfigChange
    Apr 27 08:32:53   chassisd[5430]: CHASSISD_SNMP_TRAP10: SNMP trap generated: FRU power off (jnxFruContentsIndex 7, jnxFruL1Index 1, jnxFruL2Index 0, jnxFruL3Index 0, jnxFruName FPC: Virtual FPC @ 0/*/*, jnxFruType 3, jnxFruSlot 0, jnxFruOfflineReason 3, jnxFruLastPowerOff 275026, jnxFruLastPowerOn 215026)
    Apr 27 08:32:53   chassisd[5430]: CHASSISD_SNMP_TRAP10: SNMP trap generated: Fru Offline (jnxFruContentsIndex 7, jnxFruL1Index 1, jnxFruL2Index 0, jnxFruL3Index 0, jnxFruName FPC: Virtual FPC @ 0/*/*, jnxFruType 3, jnxFruSlot 0, jnxFruOfflineReason 3, jnxFruLastPowerOff 275026, jnxFruLastPowerOn 215026)
    Apr 27 08:32:53   chassisd[5430]: CHASSISD_SNMP_TRAP3: ENTITY trap generated: entStateOperDisabled (entPhysicalIndex 20, entStateAdmin 2, entStateAlarm 6)
    Apr 27 08:32:53   chassisd[5430]: CHASSISD_SNMP_TRAP7: SNMP trap generated: Fru Failed (jnxFruContentsIndex 7, jnxFruL1Index 1, jnxFruL2Index 0, jnxFruL3Index 0, jnxFruName FPC: Virtual FPC @ 0/*/*, jnxFruType 3, jnxFruSlot 0)
    Apr 27 08:32:53   alarmd[5636]: Alarm set: FPC color=RED, class=CHASSIS, reason=FPC 0 Hard errors
    Apr 27 08:57:21   mgd[5717]: UI_DBASE_LOGIN_EVENT: User 'root' entering configuration mode
    Apr 27 08:58:17   mgd[5717]: UI_COMMIT: User 'root' requested 'commit' operation (comment: none)
    Apr 27 08:58:17   mgd[5717]: UI_CHILD_EXITED: Child exited: PID 6496, status 7, command '/usr/sbin/mustd'
    Apr 27 08:58:18   chassisd[6498]: JAM:PL: mod info  i2cc4a
    Apr 27 08:58:18   chassisd[6498]: JAM:PL: asy info  i2cc4a
    Apr 27 08:58:18   chassisd[6498]: JAM:PL: Reg Attribs done for c4a
    Apr 27 08:58:18   chassisd[6498]: JAM:PL: vectors_set done for c4a
    Apr 27 08:58:18   chassisd[6498]: JAM:PL: ds_prepare done for c4a
    Apr 27 08:58:18   chassisd[6498]: JAM:PL: mod info  i2ccd8
    Apr 27 08:58:18   chassisd[6498]: JAM:PL: asy info  i2ccd8
    Apr 27 08:58:18   chassisd[6498]: JAM:PL: Reg Attribs done for cd8
    Apr 27 08:58:18   chassisd[6498]: JAM:PL: vectors_set done for cd8
    Apr 27 08:58:18   chassisd[6498]: JAM:PL: ds_prepare done for cd8
    Apr 27 08:58:18   chassisd[6498]: VMX Platform. cbd_virtual_init
    Apr 27 08:58:18   chassisd[6498]: VMX Platform. cbd_virtual_init
    Apr 27 08:58:18   mobiled: main Neither BNG LIC nor JMOBILE package is present,exit mobiled
    Apr 27 08:58:18   l2cpd[6523]: ppmlite_var_init: iri instance = 36736
    Apr 27 08:58:19   ffp[6524]: "dynamic-profiles": No change to profiles
    Apr 27 08:58:20   mgd[5717]: UI_COMMIT_COMPLETED: commit complete
    Apr 27 08:58:20   chassisd[5430]: fpc_atlas_ok_to_powerup() FPC slot 0 i2c_id 0xbaa is_vir [1] data_valid[1]is_jam[0] is_plug[0]
    Apr 27 08:58:20   chassisd[5430]: CHASSISD_SNMP_TRAP10: SNMP trap generated: FRU power on (jnxFruContentsIndex 7, jnxFruL1Index 1, jnxFruL2Index 0, jnxFruL3Index 0, jnxFruName FPC: Virtual FPC @ 0/*/*, jnxFruType 3, jnxFruSlot 0, jnxFruOfflineReason 2, jnxFruLastPowerOff 275026, jnxFruLastPowerOn 427708)
    Apr 27 08:58:22   fpc0 LOGIN: : SETTING UP DPDK ENVIRONMENT ON
    Apr 27 08:58:22   fpc0 sudo:     root : TTY=unknown ; PWD=/home/pfe/riot/dpdk ; USER=root ; COMMAND=/sbin/modprobe uio
    Apr 27 08:58:22   fpc0 sudo:     root : TTY=unknown ; PWD=/home/pfe/riot/dpdk ; USER=root ; COMMAND=/sbin/insmod /home/pfe/riot/dpdk/x86_64-native-linuxapp-gcc/kmod/igb_uio.ko
    Apr 27 08:58:22   fpc0 LOGIN: : Creating /mnt/huge and mounting as hugetlbfs
    Apr 27 08:58:22   fpc0 sudo:     root : TTY=unknown ; PWD=/home/pfe/riot/dpdk ; USER=root ; COMMAND=/bin/mkdir -p /mnt/huge
    Apr 27 08:58:23   fpc0 LOGIN: : Detected Junos Device type vmxnet3
    Apr 27 08:58:23   fpc0 sudo:     root : TTY=unknown ; PWD=/home/pfe/riot/dpdk ; USER=root ; COMMAND=/home/pfe/riot/dpdk/tools/dpdk_nic_bind.py -u 0b:00.0
    Apr 27 08:58:23   fpc0 sudo:     root : TTY=unknown ; PWD=/home/pfe/riot/dpdk ; USER=root ; COMMAND=/home/pfe/riot/dpdk/tools/dpdk_nic_bind.py -b igb_uio 0b:00.0
    Apr 27 08:58:23   fpc0 LOGIN: start_afi_server.sh : Found /usr/share/pfe/afi-server.tgz tarball
    Apr 27 08:58:23   fpc0 LOGIN: : Detected Junos Device type vmxnet3
    Apr 27 08:58:23   fpc0 LOGIN: : Number of CPUs available : 3
    Apr 27 08:58:23   fpc0 LOGIN: : Number of PORTs to service : 1, loopbacks: 0
    Apr 27 08:58:23   fpc0 LOGIN: : vdev_str:
    Apr 27 08:58:23   fpc0 LOGIN: : /home/pfe/riot/build/app/riot -c 0x3 -n 2 --lcores='(1-2)@1' --log-level=5  -w 0b:00.0 -- --rx "(0,0,0,1)," --tx "(0,1)," --w "2"   --rpio "local,3000,3001" --hostif "local,3002" --bsz "(32,32),(32,32),(32,32)"
    Apr 27 08:58:24   fpc0 LOGIN: start_afi_server.sh : tar -xzf /usr/share/pfe/afi-server.tgz : SUCCESS
    Apr 27 08:58:24   fpc0 LOGIN: start_afi_server.sh : Running /usr/share/pfe/afi-server/usr/bin/run-afi-server.sh ...
    Apr 27 08:58:24   fpc0 riot[10537]: rte_eth_dev_config_restore: port 0: MAC address array not supported
    Apr 27 08:58:24   fpc0 riot[10537]: rte_eth_stats_reset: Function not supported
    Apr 27 08:58:32   fpc0 afi-server: luchip_client_start: trying server connection, attempt 1
    .....

    I cant see anything online about the luchip message although the message is descriptive, I'm unsure how to fix it.

     

    Thanks

     

    Paul


    #17.4
    #vmx
    #vFPC


  • 18.  RE: vMX can't connect fpc,slot 0 Absent

    Posted 04-28-2019 19:29

    Hi Paul,

     

    What is the ESXi version used?

     

    Could you please share "*.vmx" file for both vCP & vFP. [It will be under datastore folder of both VM's]



  • 19.  RE: vMX can't connect fpc,slot 0 Absent

    Posted 08-17-2022 13:33
    Same issue , I have not see a resolution  , on 18.3  as in the JNCIE-ENT blueprint.

    ------------------------------
    Simon Bingham
    ------------------------------