I have the following topology
I have MSDP connection between RP1 and RP3. I expected to ping from S-2 to R-1. Can I do that ?
S-2#ping 239.0.33.1 (239.0.33.1 is registered from R-1)
Type escape sequence to abort.
Sending 1, 100-byte ICMP Echos to 239.0.33.1, timeout is 2 seconds:
root@RP3# run show msdp
Peer address Local address State Last up/down Peer-Group SA Count
1.1.1.1 33.33.33.33 Established 03:21:25 Anycast 0/0
root@RP3# run show route table inet.4
inet.4: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
239.0.33.1,10.100.112.22/64*[MSDP/175/2] 00:00:36, from 111.111.111.111
Local
10.100.112.22 is configured on S-2.
Any insights ? what have I missed ?
thanks a lot !!
.