Routing

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  Frame Relay over GRE

    Posted 10-29-2021 07:12
    Hi Folks
    I have this case in my project and need to know is it capable and how can I configure it, please.
    on this scenario from Left to Right :
    - Device does not support IP add and only supports FR without IP using E1 Link.
    - Juniper MX480 has an E1 interface with Frame Relay L2 Device and encapsulation is Framerelay interface is up and running.
        and has an Ethernet interface in the right connect to Linux using IP add.
    - Linux in the Right connects to MX480 using ethernet media and supports IP add.

    My Question is can MX480 support Raw Frame Relay encapsulation with ptype 0x6559 and how can be configured?

    Thanks in advance 



    ------------------------------
    RAAD SAAD
    ------------------------------


  • 2.  RE: Frame Relay over GRE

     
    Posted 27 days ago
    Frame relay is supported on the MX but you will need to confirm what card will be needed for the physical connection.  This is the documentation site.

    https://www.juniper.net/documentation/en_US/junos/topics/concept/interfaces-frame-relay-overview.html

    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
    http://puluka.com/home
    ------------------------------