Trying to test new radius server in a remote data center. Vendor is reporting that they are not seeing the radius packets being received. They can see ICMP and Telnet packets from the source IP of XXX.XXX.XXX.254.
Using the following commands to test.
test aaa ppp profile AccessProfile_TestRadius user user password password - No packets received by Vendor
test access radius-server XXX.XXX.XXX.149 source-address XXX.XXX.XXX.254 authentication-port 1645 secret secret retry 2 timeout 2 user user password password - No packets received by Vendor
show configuration access
radius-server {
XXX.XXX.XXX.233 {
port 1645;
accounting-port 1646;
secret "$9$KUS8-wHkPFnCP5"; ## SECRET-DATA
timeout 90;
source-address XXX.XXX.XXX.254;
}
XXX.XXX.XXX.9 {
port 1645;
accounting-port 1646;
secret "$9$KUS8-wHkPFnCP5"; ## SECRET-DATA
source-address XXX.XXX.XXX.254;
}
XXX.XXX.XXX.149 {
port 1645;
accounting-port 1646;
secret "$9$pvxIBclbwgGDkvWL7-Voan/CAu1"; ## SECRET-DATA
timeout 90;
source-address XXX.XXX.XXX.254;
}
}
profile AccessProfile_general {
authentication-order radius;
radius {
authentication-server [ XXX.XXX.XXX.233 XXX.XXX.XXX.9 ];
accounting-server [ XXX.XXX.XXX.233 XXX.XXX.XXX.9 ];
}
accounting {
order radius;
accounting-stop-on-failure;
accounting-stop-on-access-deny;
immediate-update;
update-interval 10;
statistics time;
}
}
profile AccessProfile_TestRadius {
authentication-order radius;
radius {
authentication-server XXX.XXX.XXX.149;
accounting-server XXX.XXX.XXX.149;
}
accounting {
order radius;
accounting-stop-on-failure;
accounting-stop-on-access-deny;
immediate-update;
update-interval 10;
statistics time;
}
}
Any assistance would greatly be appreciated.