Routing

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



Expand all | Collapse all

How to configure Junos IPv6 auto configuration ?

  • 1.  How to configure Junos IPv6 auto configuration ?

    Posted 05-11-2021 14:52
    Any equivalent to the following cisco configuration for Junos ?

    interface Ethernet0/0

     ipv6 enable

     ipv6 add autoconfig

    thanks !!



  • 2.  RE: How to configure Junos IPv6 auto configuration ?

     
    Posted 05-12-2021 05:54
    I assume this is for ipv6 SLAAC standard

    https://www.juniper.net/documentation/en_US/junos/topics/topic-map/ipv6-interfaces-neighbor-discovery.html

    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
    http://puluka.com/home
    ------------------------------



  • 3.  RE: How to configure Junos IPv6 auto configuration ?

    Posted 05-12-2021 09:16
    thanks a lot !
    I like to know how a Junos client is configured with SLAAC.

    I configured an vMX with route-advertisement to advertise an ipv6 prefix, I can configure Cisco devices and Linux to use this received prefix to auto configure its SLAAC address. But I do not know how to auto configure a Junos client.



  • 4.  RE: How to configure Junos IPv6 auto configuration ?

    Posted 05-12-2021 09:26
    Does Junos router support this ?
    [edit interfaces ge-0/0/0 unit 0 family inet6 dhcpv6-client]
    user@host# set client-type autoconfig