Routing

Subscriber (demux) interface

  • 1.  Subscriber (demux) interface

    Posted 24 days ago
    Hello;
    I think to create a "dynamic demux interface" we need to use the following method. 

    dynamic-profiles {
      MY_PROFILE;
        demux0 {
          unit $junos-interface-unit {
            demux-options {
              underlying-interface $junos-underlying-interface;
            }
            family inet {
              demux-source {
                $junos-subscriber-ip-address;
              }
              unnumbered-address lo0.0 preferred-source-address 10.1.2.3;
            }
          }

    So  If we use "auto-configure" command under an interface, then should we call this a "dynamic demux interface" or it is still a static method of creating subscriber interface that uses variables?

    interface ge0/0/0

        stacked-vlan-tagging

        auto-configure
    ...


    And to which interface does the "unnumbered interface" command in the first code above refer? (lo0.0 or dynamic demux )?

    ------------------------------
    TAYMAZ MOHSENZADEH
    ------------------------------