Routing

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



Subscriber (demux) interface

  • 1.  Subscriber (demux) interface

    Posted 05-29-2021 07:52
    Hello;
    I think to create a "dynamic demux interface" we need to use the following method. 

    dynamic-profiles {
      MY_PROFILE;
        demux0 {
          unit $junos-interface-unit {
            demux-options {
              underlying-interface $junos-underlying-interface;
            }
            family inet {
              demux-source {
                $junos-subscriber-ip-address;
              }
              unnumbered-address lo0.0 preferred-source-address 10.1.2.3;
            }
          }

    So  If we use "auto-configure" command under an interface, then should we call this a "dynamic demux interface" or it is still a static method of creating subscriber interface that uses variables?

    interface ge0/0/0

        stacked-vlan-tagging

        auto-configure
    ...


    And to which interface does the "unnumbered interface" command in the first code above refer? (lo0.0 or dynamic demux )?

    ------------------------------
    TAYMAZ MOHSENZADEH
    ------------------------------