Routing

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  Route Preference in BGP with two AS number

    Posted 09-27-2021 05:26
    We are using BGP with two different ISPs(Different AS number) in MX-104 router . My question is  how to give higher  preference to one AS number over other, so that my data will always flows with my preferred ISP and in case if preferred route is down it automatically shifts to less preferred path..

    ------------------------------
    VIKAS BHARTI
    ------------------------------


  • 2.  RE: Route Preference in BGP with two AS number

     
    Posted 09-27-2021 05:53
    You have a few options here.

    If you prefix allows, the best option is the advertise smaller prefixes to the preferred ISP and larger to the backup one by simply cutting your prefix in half.  For example
    #.#.#.#/20 with two prefixes to the primary​
    #.#.#.#/19 with the full single prefix to the secondary

    This will always work and cannot be easily over ridden by the ISP.

    If you only have /24 so cannot split prefixes, your next best option is to lookup the community options with your backup ISP provider.  Many ISP provide a list of BGP communities that you can use to influence their usage of your routes.  What you want is the community to lower the local preference of your advertisement.  When you add this to the route the secondary ISP will consider your advertisement a backup route but use the route it eventually gets from your other ISP as primary.

    Your last options is to add one or two additional copies of your AS number to the route you advertise to the backup ISP.  The number of AS is used to prefer one route over another but comes later in the process.  And many ISP no longer use this criteria but manage traffic more explicitly.  So it has less effect.

    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
    http://puluka.com/home
    ------------------------------