I want to create a policy/policer to protect the control plane/routing-engine.
I have read the documentation and found this example:
set firewall policer police_pps if-exceeding-pps pps-limit 1k
set firewall policer police_pps if-exceeding-pps packet-burst 150
set firewall policer police_pps then discard
set firewall family inet filter my_pps_filter term term1 then policer police_pps
set interfaces lo0 unit 0 family inet filter input my_pps_filter
set interfaces lo0 unit 0 family inet address 127.0.0.1/32
I am already using the loopback interface for other functionality and realize you can only have one loopback per routing table. Is there a workaround?
Thanks
------------------------------
Jack
------------------------------