Hello everyone.
I`m trying to implement an ipfix for monitoring flow events.
Right now my configuration looks like this:
show chassis
fpc 0 {
pic 0 {
adaptive-services {
service-package layer-3;
}
}
}
fpc 1 {
pic 2 {
adaptive-services {
service-package layer-3;
}
}
}
show configuration interfaces ams0
load-balancing-options {
member-interface mams-0/0/0;
member-interface mams-1/2/0;
member-failure-options {
redistribute-all-traffic {
enable-rejoin;
}
}
}
services-options {
jflow-log {
message-rate-limit 100000;
}
pba-interim-logging-interval 3600;
}
unit 10 {
family inet;
service-domain inside;
}
unit 20 {
family inet;
service-domain outside;
}
show configuration services jflow-log
collector c1 {
destination-address 2.2.2.2;
destination-port 4739;
source-ip 1.1.1.1;
}
collector-group cg1 {
collector c1;
}
template-profile t1 {
collector c1;
template-type nat;
version ipfix;
refresh-rate {
packets 5000;
seconds 600;
}
}
flows are being sampled, but i cannot see destination address in exported data. Is there a way to get it exported?