Routing

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  DWDM Support on MPC10E-10C-BASE

    Posted 12-19-2020 03:08

    Hi

    I wonder does MPC10E-10C-BASE card support DWDM QSFPP28? I am going to use this card on a MX9690 with SCBE3-MX-BB and  RE-S-X6-128G-S-BB, the chassis will use Enhanced back plane. 

    Also another question is do I need special license for this?

    Thank you for your help and support

    Alireza



    ------------------------------
    Alireza Soltanian
    ------------------------------


  • 2.  RE: DWDM Support on MPC10E-10C-BASE

    Posted 08-05-2021 09:16
    Hi Alireza,

    There are many QSFP28 Variants gets supported for CWDM. 

    You may need to look for which specific model you are looking for using Pathfinder supported Interface card list under MPC10E hardware

    https://apps.juniper.net/hct/model/?component=MPC10E-15C-MRATE&tab=sComponents



    ------------------------------
    Jayaram O P
    ------------------------------



  • 3.  RE: DWDM Support on MPC10E-10C-BASE

    Posted 09-20-2021 10:04
    CWDM != DWDM

    ------------------------------
    Brian Johnson
    brian.johnson@walkerfirst.com
    ------------------------------