Routing

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  MX10003 20.4R3.8 , Class of service , why can I not select "EXP" / no EXP option.

    Posted 05-10-2022 11:26


    XXX-BR-1# set et-*/*/* classifiers ?
    Possible completions:
    + apply-groups Groups from which to inherit configuration data
    + apply-groups-except Don't inherit configuration data from these groups
    > dscp Differentiated Services code point classifier
    > ieee-802.1 IEEE-802.1 classifier
    > ieee-802.1ad IEEE-802.1ad (DEI) classifier
    > inet-precedence IPv4 precedence classifier
    {master}[edit class-of-service interfaces]
    root@XXXBR-1# set et-*/*/* classifiers ex
    ^
    syntax error.

    This appear to conflict with the documentation I'm reading.

    Thanks in advance 

    Simon



    ------------------------------
    Simon Bingham
    ------------------------------


  • 2.  RE: MX10003 20.4R3.8 , Class of service , why can I not select "EXP" / no EXP option.

    Posted 05-11-2022 09:49
    Try applying on a logical ( unit *) interface

    xxx# set class-of-service interfaces ge-0/0/0 classifiers ?
    Possible completions:
    + apply-groups Groups from which to inherit configuration data
    + apply-groups-except Don't inherit configuration data from these groups
    > dscp Differentiated Services code point classifier
    > ieee-802.1 IEEE-802.1 classifier
    > ieee-802.1ad IEEE-802.1ad (DEI) classifier
    > inet-precedence IPv4 precedence classifier


    xxx# set class-of-service interfaces ge-0/0/0 unit 0 classifiers ?
    Possible completions:
    + apply-groups Groups from which to inherit configuration data
    + apply-groups-except Don't inherit configuration data from these groups
    > dscp Differentiated Services code point classifier
    > dscp-ipv6 Differentiated Services code point classifier IPv6
    > exp EXP classifier
    > ieee-802.1 IEEE-802.1 classifier
    > ieee-802.1ad IEEE-802.1ad (DEI) classifier
    > inet-precedence IPv4 precedence classifier
    no-default Do not apply default classifiers to this interface

    ------------------------------
    Sheetanshu Shekhar
    ------------------------------



  • 3.  RE: MX10003 20.4R3.8 , Class of service , why can I not select "EXP" / no EXP option.

    Posted 05-11-2022 09:50
    Hi,

    Because  actually you need to specify that at the unit level:

    set class-of-service interfaces et-* unit * classifiers exp <blah>



    ------------------------------
    Olivier Benghozi
    ------------------------------



  • 4.  RE: MX10003 20.4R3.8 , Class of service , why can I not select "EXP" / no EXP option.

    Posted 05-11-2022 09:50
    Hi Simon, 

    that would be because the EXP is configured under a unit and not at interface level:


    root@PE2# set class-of-service interfaces xe-0/0/0 classifiers ?
    Possible completions:
    + apply-groups Groups from which to inherit configuration data
    + apply-groups-except Don't inherit configuration data from these groups
    > dscp Differentiated Services code point classifier
    > ieee-802.1 IEEE-802.1 classifier
    > ieee-802.1ad IEEE-802.1ad (DEI) classifier
    > inet-precedence IPv4 precedence classifier


    [edit]
    root@PE2# set class-of-service interfaces xe-0/0/0 unit 0 classifiers ?
    Possible completions:
    + apply-groups Groups from which to inherit configuration data
    + apply-groups-except Don't inherit configuration data from these groups
    > dscp Differentiated Services code point classifier
    > dscp-ipv6 Differentiated Services code point classifier IPv6
    > exp EXP classifier
    > ieee-802.1 IEEE-802.1 classifier
    > ieee-802.1ad IEEE-802.1ad (DEI) classifier
    > inet-precedence IPv4 precedence classifier
    no-default Do not apply default classifiers to this interface
    [edit]
    root@PE2# set class-of-service interfaces xe-0/0/0 unit 0 classifiers

    Thanks,

    ------------------------------
    GABRIEL FLORES
    ------------------------------