Original Message:
Sent: 01-05-2021 11:35
From: Unknown User
Subject: vMX version above 20.1R1 just deteect as "olive" only?
Hi Christian,
Thanks for the output. It look like i need to upgrade my PNET version.
Thanks again
Original Message:
Sent: 01-05-2021 07:07
From: CHRISTIAN SCHOLZ
Subject: vMX version above 20.1R1 just deteect as "olive" only?
Sure. I did not optimize this test at all so it's basically the default template:
-machine type=pc-1.0,accel=kvm -serial mon:stdio -nographic
BR
Christian
------------------------------
Christian Scholz
Juniper Networks Ambassador | JNCIE-SEC #374
Mail: chs@ip4.de
Blog: jncie.eu
Original Message:
Sent: 01-04-2021 05:16
From: Unknown User
Subject: vMX version above 20.1R1 just deteect as "olive" only?
Hi all,
Just to update. I'm change using .ova but it still detect as Olive on VCP. Anyone here success to test version 20.2 and above.
Thanks
Original Message:
Sent: 12-24-2020 02:33
From: Unknown User
Subject: vMX version above 20.1R1 just deteect as "olive" only?
Hi all,
Below is the output. I'm using Ubuntu 18. Any one here has try?
root> show version
Model: olive
Junos: 20.3R1.8
JUNOS OS Kernel 64-bit [20200908.87c9d89_builder_stable_11]
JUNOS OS libs [20200908.87c9d89_builder_stable_11]
root> show chassis routing-engine
error: Unrecognized command (chassis-control)
Original Message:
Sent: 12-19-2020 22:20
From: Unknown User
Subject: vMX version above 20.1R1 just deteect as "olive" only?
Hi,
I'm no issue on 20.1 but the issue on 20.2 and 20.3 only. By the way i'm used Ubuntu 18 (PNETLAB). So it should not have an issue. Anyone here also can test version 20.2 and 20.3 on EVE?
Thanks
Original Message:
Sent: 12-19-2020 12:43
From: Daniel
Subject: vMX version above 20.1R1 just deteect as "olive" only?
Hi,
starting with JUNOS 20.1 you need EVE-NG PRO, as Ubuntu 18.04.3 LTS is a requirement for this. EVE-NG Community works with Ubuntu 16.04.
So you can use everything up to and including JUNOS 19.4 with the Community Edition. Starting with 20.1, only EVE-NG Pro works.
You can find the requirements here:
https://www.juniper.net/documentation/en_US/vmx/topics/reference/general/vmx-hw-sw-minimums.html
------------------------------
------------------------------
If my answer provides the solution, please mark my post as "Best Answer".
If you think my answer helps, please "Recommend" my post.
Original Message:
Sent: 12-19-2020 12:39
From: Unknown User
Subject: vMX version above 20.1R1 just deteect as "olive" only?
Hi,
I'm using EVE community. By the way it should not issue whether use community or pro version because below version 20.1 and below can work on community version.
Thanks
Original Message:
Sent: 12-19-2020 12:23
From: Daniel
Subject: vMX version above 20.1R1 just deteect as "olive" only?
Hi,
are you using EVE-NG Community or Professional Edition?
------------------------------
------------------------------
If my answer provides the solution, please mark my post as "Best Answer".
If you think my answer helps, please "Recommend" my post.
Original Message:
Sent: 12-19-2020 12:08
From: Unknown User
Subject: vMX version above 20.1R1 just deteect as "olive" only?
Hi,
The issue when i use vmx version 20.2 also 20.3 it just detect as olive only. So when do command show chassis routing engine it throw the error. I'm test it using EVE-NG & PNET. Same output.
Thanks
Original Message:
Sent: 12-19-2020 11:49
From: Daniel
Subject: vMX version above 20.1R1 just deteect as "olive" only?
Hi kronicklez,
In general, Juniper is optimizing the file size regularly. E.g. 20.1 has a size of 5.7 GB, and 20.2 is reduced to 1.2 GB. There shouldn't be any reason to tweak anything, 20.2 can be used the same way as 20.1. There is nothing mentioned in the release notes as well. So no reason to worry about the file size.
------------------------------
------------------------------
If my answer provides the solution, please mark my post as "Best Answer".
If you think my answer helps, please "Recommend" my post.
Original Message:
Sent: 12-19-2020 11:40
From: Unknown User
Subject: vMX version above 20.1R1 just deteect as "olive" only?
Hi all,
I'm testing vMX version 20.1R2 and above. But it look like that version above not same like below version 20.1R1. Also the size of image VCP is too many different between both version. Any one know is it version 20.1R2 and above need something to tweak so it can be use like other vMX?
Thanks and appreciate nay feedback