Routing

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



Expand all | Collapse all

How best to replace Routing-engine on MX480

This thread has been viewed 9 times
  • 1.  How best to replace Routing-engine on MX480

    Posted 05-09-2022 06:00
    Hello,

    We were running on EoL RE-S-1300 engines and would like to replace with new ones. the chassis we are having is mx480. 
    since the two REs are on different software versions, can we slot the new one and make it slave and populate configs and sync between the two ? Also can we keep the OLD one as slave once the new RE is up and running on the same chassis or the two REs need to run same versions to work as master/slave. 

    what shall we consider to avoid outages. 

    Regards,
    Lish.


  • 2.  RE: How best to replace Routing-engine on MX480

    Posted 05-09-2022 11:31
    Hello Lish, 

    Both RE should be on same version to sync. 

    Thanks 
    Ruban

    ------------------------------
    RUBAN JOHNSON
    ------------------------------