Routing

 View Only
last person joined: yesterday 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.
Expand all | Collapse all

forwarding the connection to the firewall and re-receiving it to another router

  • 1.  forwarding the connection to the firewall and re-receiving it to another router

    Posted 12-24-2021 06:23
    Hello, sorry for my bad use of English.

    I have set up a structure as I have indicated in the picture below.

    Step 1: I make a static route to the firewall for the connection request from the client.
    Step 2: I forward all requests to the firewall to the same router via a 2nd port with a static route.

    unfortunately falling into the loop at this point
    I did some work on routing-instance, but unfortunately I couldn't come to a conclusion.

    please help me what is the protocol i need to use in this matter
    I would be very happy if there is an example configuration



    ------------------------------
    Life
    ------------------------------


  • 2.  RE: forwarding the connection to the firewall and re-receiving it to another router

    Posted 12-26-2021 05:54
    This scenario can indeed be accomplished with the correct configuration of Static Routes and Routing-Instances. The two interfaces connecting with your Firewall should be on independent VRFs. Could you please share here the relevant configuration of your Juniper Router for review?

    ------------------------------
    Hector Gustavo Serrano Gutierrez
    ------------------------------