On ABR, I have the following configuration
set protocols ospf3 realm ipv4-unicast area 0.0.0.23 nssa default-lsa default-metric 10
set protocols ospf3 realm ipv4-unicast area 0.0.0.23 nssa no-summaries
set protocols ospf3 realm ipv4-unicast area 0.0.0.23 interface lo0.0 passive
set protocols ospf3 realm ipv4-unicast area 0.0.0.23 interface ge-0/0/0.45 interface-type p2p
set protocols ospf3 realm ipv4-unicast area 0.0.0.0 interface ge-0/0/5.42 interface-type p2p
set protocols ospf3 area 0.0.0.23 nssa default-lsa default-metric 10
set protocols ospf3 area 0.0.0.23 nssa no-summaries
set protocols ospf3 area 0.0.0.23 interface ge-0/0/0.45 interface-type p2p
set protocols ospf3 area 0.0.0.23 interface lo0.0 passive
set protocols ospf3 area 0.0.0.0 interface ge-0/0/5.42 interface-type p2p
From the router in NSSA area (area 23)
root@R2_B-VR2-VR3# run show ospf3 database nssa detail realm ipv4-unicast
OSPF3 database, Area 0.0.0.23
Type ID Adv Rtr Seq Age Cksum Len
NSSA 0.0.0.1 172.30.30.7 0x80000001 148 0xa19e 28
Prefix 0.0.0.0/0
Prefix-options 0x0, Metric 10, Type 1,
NSSA *0.0.0.1 172.30.30.9 0x8000000f 2346 0x24c9 48
Prefix 172.16.1.0/24
Prefix-options 0x8, Metric 2, Type 2,
Fwd addr 21.1.10.50,
NSSA *0.0.0.2 172.30.30.9 0x8000000e 1846 0x4ac 48
Prefix 172.30.30.10/32
Prefix-options 0x8, Metric 2, Type 2,
Fwd addr 21.1.10.50,
root@R2_B-VR2-VR3# run show route
inet.0: 14 destinations, 14 routes (14 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
10.146.40.0/24 *[Direct/0] 18:10:43
> via em0.0
10.146.40.189/32 *[Local/0] 18:10:43
Local via em0.0
21.1.10.48/30 *[Direct/0] 18:05:47
> via ge-0/0/0.45
21.1.10.50/32 *[Local/0] 18:05:47
Local via ge-0/0/0.45
21.1.10.52/30 *[Direct/0] 18:05:47
> via ge-0/0/1.46
21.1.10.54/32 *[Local/0] 18:05:47
Local via ge-0/0/1.46
21.1.99.0/30 *[Direct/0] 18:04:06
> via lt-0/0/10.62
21.1.99.1/32 *[Local/0] 18:05:47
Local via lt-0/0/10.62
21.1.99.4/30 *[Direct/0] 18:04:06
> via lt-0/0/10.64
21.1.99.5/32 *[Local/0] 18:04:06
Local via lt-0/0/10.64
172.16.1.0/24 *[RIP/100] 10:14:06, metric 2, tag 0
> to 21.1.99.2 via lt-0/0/10.62
172.30.30.9/32 *[Direct/0] 18:03:17
> via lo0.0
172.30.30.10/32 *[RIP/100] 10:14:06, metric 2, tag 0
> to 21.1.99.2 via lt-0/0/10.62
224.0.0.9/32 *[RIP/100] 05:31:22, metric 1
MultiRecv
inet6.0: 17 destinations, 19 routes (17 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
::/0 *[OSPF3/10] 05:24:49, metric 11
> to fe80::205:8600:2d71:9100 via ge-0/0/0.45
root@R2_B-VR2-VR3# run show ospf3 route realm ipv4-unicast
Prefix Path Route NH Metric
Type Type Type
172.30.30.7 Intra Area/AS BR IP 1
NH-interface ge-0/0/0.45, NH-addr 21.51.42.49
172.30.30.8 Intra Area/AS BR IP 1
NH-interface ge-0/0/1.46, NH-addr 21.51.42.53
0.0.0.0/0 Inter Network IP 11
NH-interface ge-0/0/1.46, NH-addr 21.51.42.53
21.1.10.44/30 Intra Network IP 2
NH-interface ge-0/0/0.45, NH-addr 21.51.42.49
NH-interface ge-0/0/1.46, NH-addr 21.51.42.53
21.1.10.48/30 Intra Network IP 1
NH-interface ge-0/0/0.45
21.1.10.52/30 Intra Network IP 1
NH-interface ge-0/0/1.46
21.51.42.48/30 Intra Network IP 2
NH-interface ge-0/0/0.45, NH-addr 21.51.42.49
21.51.42.52/30 Intra Network IP 2
NH-interface ge-0/0/1.46, NH-addr 21.51.42.53
[edit]
I saw the 0.0.0.0/0 in ospf3 database, but no in the routing table.
For IPv6, it works as expected.
Anyone can coach me this ?
thanks !!