Here is how my DC-to-DC evpn is configured... I'm pretty sure I set it up where I could add more vlans at a later time... currently I only have a vlan 17 tag flowing through this evpn
set routing-instances my-evpn-01 instance-type virtual-switch
set routing-instances my-evpn-01 route-distinguisher 123.123.128.9:5000
set routing-instances my-evpn-01 vrf-target target:64512:5000
set routing-instances my-evpn-01 protocols evpn extended-vlan-list 17
set routing-instances my-evpn-01 protocols evpn default-gateway do-not-advertise
set routing-instances my-evpn-01 bridge-domains bridge-0017 domain-type bridge
set routing-instances my-evpn-01 bridge-domains bridge-0017 vlan-id 17
set routing-instances my-evpn-01 bridge-domains bridge-0017 interface ae141.17
set routing-instances my-evpn-01 bridge-domains bridge-0017 routing-interface irb.17
set interfaces ae141 flexible-vlan-tagging
set interfaces ae141 encapsulation flexible-ethernet-services
set interfaces ae141 aggregated-ether-options lacp active
set interfaces ae141 unit 17 encapsulation vlan-bridge
set interfaces ae141 unit 17 vlan-id 17
seeing the following routes between 2 PE's...
me@mx-router> show route table my-evpn-01.evpn.0 | grep ^[0-9]
2:123.123.128.5:5000::17::12:10:66:87:51:49/304 MAC/IP
2:123.123.128.5:5000::17::24:20:72:92:06:4a/304 MAC/IP
2:123.123.128.5:5000::17::36:32:83:b3:5c:50/304 MAC/IP
2:123.123.128.5:5000::17::24:42:93:b3:75:50/304 MAC/IP
2:123.123.128.9:5000::17::11:50:f6:87:40:32/304 MAC/IP
2:123.123.128.9:5000::17::65:64:e5:4f:b5:4a/304 MAC/IP
2:123.123.128.9:5000::17::87:72:d3:b3:52:50/304 MAC/IP
2:123.123.128.9:5000::17::af:82:c3:b3:57:50/304 MAC/IP
2:123.123.128.5:5000::17::cd:90:b6:87:51:49::22.33.17.11/304 MAC/IP
2:123.123.128.9:5000::17::ef:a0:a6:87:40:32::22.33.17.7/304 MAC/IP
3:123.123.128.5:5000::17::123.123.128.5/248 IM
3:123.123.128.9:5000::17::123.123.128.9/248 IM
------------------------------
Aaron Gould
Senior Network Engineer
aaron@gvtc.comhttps://www.linkedin.com/in/agould123/------------------------------
Original Message:
Sent: 11-01-2021 19:09
From: Anonymous User
Subject: Vlan-aware EVPN
This message was posted by a user wishing to remain anonymous
Hello all,
I've been struggling with a lab scenario where I have a multi-VLAN CE. I would like to match several different VLANs from a same CE, in a single interface and unit.
Trying 'vlan-id-range' or 'vlan-id-list' doesn't work.
Anyone can shed some light?