This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.

  • 1.  SRX300 core dump when executing a "show" command

    Posted 08-31-2021 05:49
    Dear Juniper lovers,

    We have an issue with a SRX300 which generates core dumps when executing a "show" command.
    Also the "grep" process hangs and generates a lot of cpu. Killing the grep process brings the cpu back to normal state.

    Junos version : Juniper JunOS 19.4R3-S1.3

    I didn't find any related software bug / corrections..

    Somebody has encountered this issue and if yes, which action have you done to solve this issue ?

    Aug 31 11:09:31 xxxxx /kernel: BAD_PAGE_FAULT: pid 34925 (grep), uid 0: pc 0x204eee0c got a write fault at 0
    Aug 31 11:09:31 xxxxx /kernel: Trapframe Register Dump:
    Aug 31 11:09:31 xxxxx /kernel: zero: 0000000000000000 at: 000000002075f430 v0: 0000000000000000 v1: 0000000000000000
    Aug 31 11:09:31 xxxxx /kernel: a0: 000000000046b000 a1: 000000000046d204 a2: 000000000046b000 a3: 0000000000000002
    Aug 31 11:09:31 xxxxx /kernel: t0: 000000002075f430 t1: 000000005bfedb70 t2: 000000000000004d t3: 00000000205fe448
    Aug 31 11:09:31 xxxxx /kernel: ta0: 000000005bfedc04 ta1: 000000002075f460 ta2: 0000000000000b18 ta3: 0000000020468220
    Aug 31 11:09:31 xxxxx /kernel: t8: 0000000000000000 t9: 00000000204edb7c s0: 000000000046d204 s1: 000000000046b000
    Aug 31 11:09:31 xxxxx /kernel: s2: 00000000204edb7c s3: 0000000000000000 s4: 0000000000468f28 s5: 000000000046b000
    Aug 31 11:09:31 xxxxx /kernel: s6: 0000000000000008 s7: 0000000000000009 k0: 0000000000000000 k1: 0000000000000000
    Aug 31 11:09:31 xxxxx /kernel: gp: 0000000000057bf4 sp: 000000005bfedb20 s8: 000000000046a000 ra: 00000000204ec810


  • 2.  RE: SRX300 core dump when executing a "show" command

    Posted 09-01-2021 05:40
    would you mind sharing which show command (only a single one or also variants of it) causes this? What is grep being used for ("show ... | grep ..." for the same command or another context)?