Hello,
the "4" is the encapsulation type. 4 means Ethernet:
encapsulation type-Type of encapsulation, represented by a number: (1) Frame Relay DLCI, (2) ATM AAL5 VCC transport, (3) ATM transparent cell transport, (4) Ethernet, (5) VLAN Ethernet, (6) HDLC, (7) PPP, (8) ATM VCC cell transport, (10) ATM VPC cell transport.
You can find the full description here:
https://www.juniper.net/documentation/en_US/junos/topics/reference/command-summary/show-route-table.html#show-route-table------------------------------
------------------------------
------------------------------
If my answer provides the solution, please mark my post as "Accepted Solution".
If you think my answer helps, please spend some Kudos
------------------------------
Original Message:
Sent: 11-19-2020 10:00
From: Unknown User
Subject: l2circuit.0 output questionq
root@PE2# run show route table l2circuit.0
l2circuit.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
192.168.100.1:CtrlWord:4:21:Local/96
*[L2CKT/7] 00:44:09, metric2 1
> to 172.16.22.22 via ge-0/0/0.0, Push 299840
192.168.100.1:CtrlWord:4:21:Remote/96
*[LDP/9] 00:12:06
Discard
What does 4 stands for ?
thanks !!