Hi
I'm running RSVP between vMX and Huawei Router NE80. After I configure, the result show "RSVP Neighbor down but RSVP Session is UP"
and my MPLS LSP is already up. Is it possible in this case? Do you have any idea on this.
vMX# run show rsvp neighbor
RSVP neighbor: 6 learned
Address Idle Up/Dn LastChange HelloInt HelloTx/Rx MsgRcvd
2.2.2.2 0 6/5 21:04:26 9 14807/14812 926
4.4.4.4 20:05 0/0 20:06 9 57436/0 0
5.5.5.5 15:44:28 0/0 5d 23:10:17 9 57269/0 0
10.0.0.9 20:25 2/2 5:41:33 9 57710/53059 28928
10.0.0.29 0 1/0 5d 23:09:15 9 57274/57262 11458
10.0.0.18 0 3/2 19:12 9 59068/2258 10332
[edit protocols rsvp]
vMX# run show rsvp session
Ingress RSVP: 3 sessions
To From State Rt Style Labelin Labelout LSPname
1.1.1.1 3.3.3.3 Up 0 1 FF - 48177 r4-r1
4.4.4.4 3.3.3.3 Up 0 1 FF - 3 r3-r4
5.5.5.5 3.3.3.3 Up 0 1 FF - 3 r4-rr
Total 3 displayed, Up 3, Down 0
vMX# run show mpls lsp detail
Ingress LSP: 3 sessions
4.4.4.4
From: 3.3.3.3, State: Up, ActiveRoute: 0, LSPname: r3-r4
ActivePath: (primary)
FastReroute desired
LSPtype: Static Configured, Penultimate hop popping
LoadBalance: Random
Encoding type: Packet, Switching type: Packet, GPID: IPv4
LSP Self-ping Status : Enabled
*Primary State: Up
Priorities: 7 0
OptimizeTimer: 120
SmartOptimizeTimer: 180
Flap Count: 2
MBB Count: 2
Reoptimization in 23 second(s).
Computed ERO (S [L] denotes strict [loose] hops): (CSPF metric: 10)
10.0.0.18 S
Received RRO (ProtectionFlag 1=Available 2=InUse 4=B/W 8=Node 10=SoftPreempt 20=Node-ID):
10.0.0.18(flag=0x40 Label=3) 4.4.4.4(flag=0x20 Label=3)
------------------------------
Thank in advance
Lomo,
------------------------------