Routing

 View Only
last person joined: 4 days ago 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.

  • 1.  VRRP Setup

    Posted 04-20-2021 09:50
    Hello,

    Given the following setup:

    R1---------- VRRP1 ----------- R2
    |                                                                |
    |                                                                |
     ---------VRRP2 ------------------

    How can I configure the VRRP so that if one port from the left side will fail VRRP will make the R2 router master for both VRRP groups?

    Regards,
    Alex

    ------------------------------
    ALEXANDRU MINZAT
    ------------------------------


  • 2.  RE: VRRP Setup

    Posted 04-21-2021 08:34
    Hi Alexandru, please refer to Configuring VRRP  as there are a few sample config that might be helpful!  you will be using different group numbers to differentiate different domains, on different logical/ Physical interfaces. Hope this helps!
    Original Message