set interfaces irb unit 181 family inet filter input ACL
set interfaces irb unit 181 family inet address 150.152.48.105/27 vrrp-group 51 virtual-address 150.152.48.104
set interfaces irb unit 181 family inet address 150.152.48.105/27 vrrp-group 51 priority 110
set interfaces irb unit 181 family inet address 150.152.48.105/27 vrrp-group 51 preempt
set interfaces irb unit 181 family inet address 150.152.48.105/27 vrrp-group 51 accept-data
set interfaces irb unit 181 family inet address 150.152.48.105/27 vrrp-group 51 track interface xe-0/0/2 priority-cost 40
This is the irb interface configuration
thanks !!
Original Message:
Sent: 01-25-2021 23:22
From: Yasmin Lara
Subject: Firewall filter questions
Firewall filters are always stateless!
Do you have the two networks configured in the same irb interface?
Regards,
------------------------------
Yasmin Lara
Juniper Ambassador
JNCIE-SP, JNCIE-ENT, JNCIE-DC, JNCIE-SEC
JNCDS-DC, JNCIA-DevOps, JNCIP-CLOUD, CCNP-ENT
Original Message:
Sent: 01-25-2021 23:10
From: Unknown User
Subject: Firewall filter questions
I have the following topology.