Note that using "display set" is not the normal configuration view but the commands to create configuration. This view removes notes and information that is included in standard view of simple
show configuration
The settings I think you are referring to that you want to see are in a hidden not changeable group called junos-defaults described in this documentation.
https://www.juniper.net/documentation/us/en/software/junos/cli/topics/topic-map/configuration-groups-usage.htmlTo see how groups are applied in a configuration you use
show configuration | display inheritance
But I'm not positive if the junos-defaults is included in this.
------------------------------
Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
http://puluka.com/home------------------------------
Original Message:
Sent: 05-17-2021 12:39
From: UJJAL BS
Subject: how to see juniper full configurations(default or hidden)?
operational mode ">show configuration" or in configuraiton mode "show, show | display set" will provide committed configuration. I want to see juniper's default settings/configurations like cisco "show running-config all". Basically need to see juniper's default configurations like ddos,bgp,ldp.
------------------------------
UJJAL BS
------------------------------