Routing

Hi,

is it normal in MX104 to have CB0 present/online but CB1 present/disabled ?

> show chassis environment cb 
CB 0 status:
  State                      Online Master
  Temperature                33 degrees C / 91 degrees F             
  Power 1                    
    0.75 V                       751 mV
    1.0 V                       1015 mV
    1.1 V                       1162 mV
    1.5 V                       1494 mV
    2.5 V                       2500 mV
    3.3 V                       3358 mV
    5.0 V                       4960 mV
    12.0 V                     12126 mV
  FPGA Revision              28
CB 1 status:
  State                      Present
  Power 1                    Disabled             

Thank you 

This seems expected behavior. On MX104, there's no real CB. Everything is integrated to AFEB. I saw couple of lab devices with 2 running routing-engine getting same output