Expand all | Collapse all

QFX per unit shaping

Jump to Best Answer
  • 1.  QFX per unit shaping

    Posted 01-21-2020 06:52

    Can anyone help with configuring a shaping rate on a per unit basis on the QFX?


    It seems that there is no option to configure a shaping rate or traffic-control-profile on a logical interface.


    {master:1}[edit class-of-service]
    lab@QFX-VCF# set interfaces ge-2/0/0 unit 1234 ?
    Possible completions:
    + apply-groups Groups from which to inherit configuration data
    + apply-groups-except Don't inherit configuration data from these groups
    > classifiers Classifiers applied to incoming packets
    forwarding-class Forwarding class assigned to incoming packets
    > rewrite-rules Rewrite rules applied to outgoing packets

  • 2.  RE: QFX per unit shaping
    Best Answer

    Posted 01-23-2020 22:10

    Hi Regalis, 


    I don't think you can do it using logical int, only with the physical interface.


    If this solves your problem, please mark this post as "Accepted Solution".
    If you think that my answer was helpful, please spend some Kudos.


    Thank you, 


  • 3.  RE: QFX per unit shaping

    Posted 01-24-2020 10:05

    Hi Regalis,

    Unlike MX, QFX doesn't support per-unit-schedulers.


    You can find all the supported feature here:



    PS: Please accept my response as solution if it answers your query, kudos are appreciated too!