Routing

Expand all | Collapse all

MX80 XFP 10G BIDI Support

Jump to Best Answer
  • 1.  MX80 XFP 10G BIDI Support

    Posted 09-17-2020 05:28

    Hello there,

    Hope am not cross posting;

    Am wondering if MX80 supports 10GE BIDI XFP.

    __
    Thanks!



  • 2.  RE: MX80 XFP 10G BIDI Support

    Posted 09-17-2020 05:42

    Hello virtualwalker,

     

    Greetings, 

     

    If you want to know whether MX 80 supports bidirectional GE SFP - then yes, it does support for GE SFP.

    With respect to 10GE BIDI XSFP, I do not think MX 80 supports 10GE bidirectional XSFP.

     

    The list of supported transceivers for MX 80 categorized based on speed are in the link below hyperlink:

    List of transceivers supported on the product along with its introduced software releases 

     

    Hope this helps.

     

    Please mark "Accept as solution" if this answers your query. Kudos are appreciated too! 😀

     

    Regards,
    Sharat Ainapur



  • 3.  RE: MX80 XFP 10G BIDI Support

    Posted 09-22-2020 00:24

    Thank you.



  • 4.  RE: MX80 XFP 10G BIDI Support
    Best Answer

     
    Posted 09-17-2020 07:22

    Hello virtualwalker,

     

    Juniper MX80 just supports 10G SFP+ BIDI (not XFPs), the Juniper P/Ns are JNP-SFP-10G-BX10D and JNP-SFP-10G-BX10U. You can find the datasheets here:

     

    https://apps.juniper.net/hct/model/?component=JNP-SFP-10G-BX10D

     

    https://apps.juniper.net/hct/model/?component=JNP-SFP-10G-BX10U

     

    Please note that these are only supported with the MIC-MACSEC-20GE, starting with JUNOS 18.3R1.

    It is absolutely possible that 3rd party BIDI XFPs or SFP+ are working in any other ports or MICs, it is just not supported by Juniper, but this does not mean that it is not working.

    It is always a good idea to try this out in a lab to make sure it works before putting it into production.



  • 5.  RE: MX80 XFP 10G BIDI Support

    Posted 09-17-2020 11:38

    The MX80 does not officially supports 10G XFP bidi transceivers... but go to a 3rd party supplier and they can make it work. I have personally used 10G XFP bidi transceivers on MX80 with transceivers from fs.com and Addon/Prolabs.