Sounds like the client might not have the default ipv6 gateway.
------------------------------
Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
http://puluka.com/home------------------------------
Original Message:
Sent: 10-29-2020 07:00
From: Unknown User
Subject: basic ipv6 setup srx320
Hi,
I would like to setup Native Ipv6 with srx320.
I've a ipv6 range with next hop ISP: 2d0d:200:4356::1/48
I can ping and tracert fra the srx320 to google dns ipv6 server: 2001:4860:4860::8888.
I made a subnet ge-0/0/1: 2d0d:200:4356:100:100/110 with a win 10 client 2d0d:200:4356:100:200/110 gw 2d0d:200:4356::2/110 dns 2001:4860:4860::8888.
I have rules allowing all traffic from internal to internet. Ipv6 flow based enabled.
I can ping and tracert from client 2d0d:200:4356:100:200/110 - to ge-0/0/1 2d0d:200:4356:100:100/110 - and - to internet interface ge-0/0/0 2d0d:200:4356::2/110.
I can not ping or tracert from the subnet to internet. What am I missng here? Thank you for helping