Contrail

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  vMX configuration by Contrail

    Posted 02-21-2018 23:12

    Can we configure vMX as a gateway with the device manager in Contrail?

    I am using Contrail 3.2.8 and vMX 17.4 and put the configurations from the Contrail GUI,

    while following the instrucutions. But I cannot not see any configurations in the vMX which

    are added by the device manager.  

     

    The reference is here.

    https://www.juniper.net/documentation/en_US/contrail3.2/topics/concept/using-device-manager-netconf-contrail.html

     

    There is a similar example but it seems to me that the vMX gateway is manually configured in advance.

    https://forums.juniper.net/t5/Contrail-Platform-Developers/Contrail-Cloud-Lab-Example-vSRX-service-instance-and-vMX-layer-3/td-p/288270



  • 2.  RE: vMX configuration by Contrail
    Best Answer

     
    Posted 02-22-2018 02:44

    Hi

     

    Yes, it should work. Make sure you have NETCONF enabled. When you enter Vendor and Model in Contrail GUI, make sure it is "Juniper" and "MX" (NOT "vMX").

     



  • 3.  RE: vMX configuration by Contrail

    Posted 02-26-2018 06:30

    Hi

     

    Thank you for your support.

    I used "Juniper" and "vmx" or "vMX".

     

    So let me try with "Juniper" and "MX" later.